The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Factory Tach for a 6 Cyl.? (https://67-72chevytrucks.com/vboard/showthread.php?t=189202)

l1n1b1 02-12-2006 11:18 PM

Factory Tach for a 6 Cyl.?
 
Currently doing a frame-up on a 67 shortstep and just got to wondering- is there a factory tach that will work with my 250 6 cyl.? I am going to upgrade the original 3 hole cluster to one with gauges and I thought while I had it apart now would be the time to do a tach install. Any info on this would be appreciated.
Thanks! Bryan

too much stuff 02-12-2006 11:22 PM

Re: Factory Tach for a 6 Cyl.?
 
They did make a factory 6 cyl tach. There is a couple on e-bay right now, but they seem to bring more than an 8 cyl tach. They also go to 5k rpms...

Longhorn Man 02-12-2006 11:33 PM

Re: Factory Tach for a 6 Cyl.?
 
While they are marked 8 cyl and 6 cyl... I have been told there is a hole on the back that you can reach in with ascrewdriver and adjust it to work with either or.

byrd 02-12-2006 11:36 PM

Re: Factory Tach for a 6 Cyl.?
 
I know of this hole you speak of, and it seams to be how you calibrate the gauge so I'm with Longhorn on that it may be possible to work on both.

Bob B. 02-12-2006 11:42 PM

Re: Factory Tach for a 6 Cyl.?
 
I have been told that the reproduction tach's can be calibrated for 6 cylinders.

l1n1b1 02-13-2006 12:17 AM

Re: Factory Tach for a 6 Cyl.?
 
Quote:

Originally Posted by Bob B.
I have been told that the reproduction tach's can be calibrated for 6 cylinders.

Any idea as to where the best place to get a repro tach from? I could call whoever has them and verify this.....
Thanks!
Bryan

Bob B. 02-13-2006 01:42 AM

Re: Factory Tach for a 6 Cyl.?
 
I think Classic Industries and all the others sell the same tachs and clusters. I talked to a speedometer shop in my area and he says he can calibrate one to work on a 6 cylinder.

lazygaurd 02-13-2006 01:49 AM

Re: Factory Tach for a 6 Cyl.?
 
Talk to Mark (Livrat) he has a 6 cyl tach he wants to sell.

l1n1b1 02-13-2006 02:58 AM

Re: Factory Tach for a 6 Cyl.?
 
Thanks y'all!
Quote:

Originally Posted by lazygaurd
Talk to Mark (Livrat) he has a 6 cyl tach he wants to sell.

Gave him a pm....
Bob ~ Will give Classic Industries a call today.

Is this board great, or what!?!


All times are GMT -4. The time now is 01:52 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com