The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today part IV (https://67-72chevytrucks.com/vboard/showthread.php?t=729696)

rvrfoot 05-15-2017 07:38 PM

Re: What did you do to your truck today part IV
 
3 Attachment(s)
Working on the roof.Attachment 1652263

Attachment 1652264

Attachment 1652262

Robert Haas 05-16-2017 10:15 AM

Re: What did you do to your truck today part IV
 
Quote:

Originally Posted by rvrfoot (Post 7939728)
I just installed my sway bar.Attachment 1650944

Attachment 1650943

You are going to have a problem. I had it on mine as well. at full droop with the steering at full lock you are going to have hard contact with the steering links on both sides.


simple enough fix;


Take the sway bar apart and shorten the sleeves by 1/2" ;)

rvrfoot 05-16-2017 10:48 PM

Re: What did you do to your truck today part IV
 
Thanks for the heads up i will check on it this weekend.

drmatera 05-21-2017 03:38 PM

Re: What did you do to your truck today part IV
 
2 Attachment(s)
Just scored these truck ralleys for $100 for all 4. 15 x 8

StepSide1965 05-21-2017 05:36 PM

Re: What did you do to your truck today part IV
 
That's what I'm going to run on my truck, like the center caps, what are they off of.

drmatera 05-21-2017 05:42 PM

Re: What did you do to your truck today part IV
 
Quote:

Originally Posted by StepSide1965 (Post 7948407)
That's what I'm going to run on my truck, like the center caps, what are they off of.

Not really sure, the guy said they were on his '85 C10 when he bought it. They are in really good shape too....

65chevysub 05-21-2017 11:31 PM

Re: What did you do to your truck today part IV
 
2 Attachment(s)
Quote:

Originally Posted by drmatera (Post 7948419)
Not really sure, the guy said they were on his '85 C10 when he bought it. They are in really good shape too....

Thats the same wheels I have on my burb. They came off of an 86 Suburban. Kind of hard to see but I temporarily sprayed them silver until I can get them back to original. Also going to make my center caps all chrome. Saw the how to on Youtube

graymage 05-22-2017 08:54 AM

3 Attachment(s)
finally home for a couple weeks so lets see what I can get done, so far the fire wall is painted will pick it up today, got ebrake mounted
Posted via Mobile Device

forestb 05-22-2017 11:48 AM

Re: What did you do to your truck today part IV
 
If you fail at your attempt to do something did you still get something done.

Spent the day trying to figure out why my tail lights are not working.
And yes I checked the ground;)

Northwest Outlaw 05-24-2017 07:57 PM

Re: What did you do to your truck today part IV
 
1 Attachment(s)
Tried to road trip her, she had other plans...
Attachment 1654822
full story coming to my build thread soon

GMDad 05-24-2017 08:51 PM

Re: What did you do to your truck today part IV
 
My buddy put those rally wheels on his 68 SWB. Ordered a set of clips that bolt in where the 3 screws that hols the rally cap go on. Has a set of mid 50s Chev pickup caps coming to install. Painted the wheels whits with a narrow trim ring. Will try to get a pic in a week or two when all together. I think they will look really good.

Lugnutz65 05-24-2017 09:11 PM

Re: What did you do to your truck today part IV
 
4 Attachment(s)
Finished the CPP disc brake upgrade on my 1965 Short Step. Captainfab firewall adapter plate, 1995 Blazer brake booster and MC, Speedway pushrod extender with Heim joint, Summit Racing brake bias (but has Wilwood name - cast into the metal) so I can fine tune the rear brakes.

graymage 05-24-2017 09:30 PM

Re: What did you do to your truck today part IV
 
3 Attachment(s)
got cab on and started on master cylinder and pedal and shifter

AngryPirate 05-25-2017 03:37 PM

Re: What did you do to your truck today part IV
 
Quote:

Originally Posted by graymage (Post 7951277)
got cab on and started on master cylinder and pedal and shifter

Out of curiosity, what are you doing for the clutch cylinder that would usually be part of the master cylinder? I'd like to move away from the single reservoir my 60 GMC has.

thanks!

graymage 05-25-2017 03:45 PM

Quote:

Originally Posted by AngryPirate (Post 7951810)
Out of curiosity, what are you doing for the clutch cylinder that would usually be part of the master cylinder? I'd like to move away from the single reservoir my 60 GMC has.

thanks!

I am running a 700r4 so I quess I don't understand the question
Posted via Mobile Device

rvrfoot 05-25-2017 03:47 PM

Re: What did you do to your truck today part IV
 
I think he seen the shifter in your truck

graymage 05-25-2017 03:54 PM

Quote:

Originally Posted by rvrfoot (Post 7951818)
I think he seen the shifter in your truck

Ok I see, I quess I got the illusion I was looking for
Posted via Mobile Device

AngryPirate 05-25-2017 04:07 PM

Re: What did you do to your truck today part IV
 
Quote:

Originally Posted by graymage (Post 7951815)
I am running a 700r4 so I quess I don't understand the question
Posted via Mobile Device

Ah. I saw the floor shifter that looks like a stick.

The Rocknrod 05-25-2017 04:29 PM

Re: What did you do to your truck today part IV
 
I took the brake pedal bracket from inside the cab, laid in on carpet sideways.
Installed the brake pedal spring and return bumper.
Mounted captainfabs bracket to it.
Mounted the power brake booster to that.
Then built out the brake pedal pushrod to the correct length, with adjustment left of course.
That way I didnt have to do it in the truck after their done painting it.
Just wish I took pictures. :(

ironman3452 05-26-2017 06:11 PM

Re: What did you do to your truck today part IV
 
2 Attachment(s)
http://67-72chevytrucks.com/vboard/a...&d=1495836428e
old and new pictures of wheels and tires I had on my 64 panel, old wheels and tires were 16.5 , new ones are 17 inch

Prflyer1 05-26-2017 06:25 PM

Re: What did you do to your truck today part IV
 
Quote:

Originally Posted by wolfsden (Post 7938954)
Painted the white stripe and added the molding trim with 3M double sided tape.
I did not want to drill holes in my truck and the tape works great.



Good lord I love these wheels!!!

Prflyer1 05-26-2017 06:29 PM

Re: What did you do to your truck today part IV
 
1 Attachment(s)
Out of all the things on my build, this one is what I am most proud today! lol the painted white shifter ball :lol:

jbgroby 05-26-2017 10:22 PM

Re: What did you do to your truck today part IV
 
1 Attachment(s)
Added another option.....my Bing Crosby Option.

graymage 05-27-2017 12:26 AM

Re: What did you do to your truck today part IV
 
3 Attachment(s)
so today I got the hydro boost plumbed and the new wiper motor installed

AngryPirate 05-27-2017 05:11 PM

Re: What did you do to your truck today part IV
 
5 Attachment(s)
Finally got the crossmember parking brake set up remove, cleaned up and re-installed and I have a parking brake now!

I'm pretty sure I put everything back correctly.


All times are GMT -4. The time now is 02:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com