The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   Gray wire from fuse box (https://67-72chevytrucks.com/vboard/showthread.php?t=766586)

Cten Trucks 06-30-2018 12:08 PM

Gray wire from fuse box
 
1 Attachment(s)
Where does this gray wire from “cluster” go to? As you can tell by picture it was frayed and hanging.
Posted via Mobile Device

VetteVet 06-30-2018 08:12 PM

Re: Gray wire from fuse box
 
See my reply in the other forum.

SonomaComa 07-12-2018 11:57 AM

Re: Gray wire from fuse box
 
Quote:

Originally Posted by Cten Trucks (Post 8291687)
Where does this gray wire from “cluster” go to? As you can tell by picture it was frayed and hanging.
Posted via Mobile Device


So what is it for?

VetteVet 07-13-2018 06:00 PM

Re: Gray wire from fuse box
 
1 Attachment(s)
Quote:

Originally Posted by SonomaComa (Post 8299676)
So what is it for?


Sorry I apologize. I usually try to reply to other members as well as the original poster.

The gray wire runs from the PNL LTS fuse on the fuse panel to the cluster plug to terminal 8 on gauge panels and to terminal 12 on idiot light panels. It joins with the heater lights panel wire on those two terminals. This diagram shows the wire via the blue arrows.


Attachment 1801542

Cten Trucks 09-19-2018 11:33 PM

Re: Gray wire from fuse box
 
Ok. I have wire all undone. From cluster plug.... two wires. One goes to back of fuse box. The other goes to heater bulb. I still can not find where gray wire that plugs in the face of the fuse box like the picture I took above.

VetteVet 09-20-2018 12:01 AM

Re: Gray wire from fuse box
 
You will need to pull the fuse panel away from the firewall by removing the two diagonal screws that hold it in place. Look on the back of the panel for a dark green wire that runs to the pnl lts fuse. The gray wire should be on the other side of the fuse that the dk green wire is attached to. The dk green wire comes from the headlight switch rheostat (dimmer switch) to the fuse panel and is the feed wire for the dash lights. The gray wire should be attached there and it runs to the terminals I mentioned in my post above.

The gray wire runs from the PNL LTS fuse on the fuse panel to the cluster plug to terminal 8 on gauge panels and to terminal 12 on idiot light panels. It joins with the heater lights panel wire on those two terminals.

zayne 10-03-2018 10:45 PM

Re: Gray wire from fuse box
 
Hello Team,
i have a 72 K5 with the same fuse box and i can't tell what fuse amps are. can you share what yours shows as i have the same fuse box?
i just need to know what those fuse numbers are so i don't put i higher number and blow something up :). thanks for any input you provide.

VetteVet 10-04-2018 10:41 AM

Re: Gray wire from fuse box
 
2 Attachment(s)
Here's a couple of pictures and some of them are a little hard to tell which amps are for which position. If you cant' decide which just post back.

Attachment 1826395



Attachment 1826396

zayne 10-04-2018 06:39 PM

Re: Gray wire from fuse box
 
The first pic is perfect, it shows info i needed. i didn't know they use 3As i'm glad i asked otherwise i would had put in 15 or 20s.

Thanks VetteVet


All times are GMT -4. The time now is 10:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com