What do you think is the smallest tires i should put on a truck with a 4-6" sus lift?
 

What do you think is the smallest tires and wheels i should put on a truck with a 4"-6" suspension lift?

------------------
94' 4X4 GMC Sierra

i thought the point of lifting was to put big tires on?
well id say 33s would be the smallest

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

I agree.. 33's with a 4 inch is ideal. 35's to 38 with the 6 inch lift. But also keep in mind your tranny gear ratio and axle ratio. Just make sure the motor rpm's are within the engine torque range. This will help save gas and wear and tear on the drivetrain.
Good luck.. Rock on people!!!

------------------
74 Chevy K-5 Blazer. 565 Tall Deck Big Block Chevy, 4.5 bore, 4.50 stroked crank, 10 to 1 pistons that are 60 over, aluminum heads with full rocker cam and lifters. hooker heads with 1 7/8" primary and 4" collectors to a pair of flowmasters. 4spd auto, 205 T-case, Dana 60 front limited slip, Corp 14 bolt rear lockers, with 4:88. Working on a 4 link coil over spring front suspenion with 63inch leaf link rear suspenion. Running 38 Ground Hawg tires on custom 16.5 bead locked rims. 8 point roll cage and lots of other goodies. Its my money pit land boat, but I love it!!