Disc brake spindles
Hey all, I'm wanting to put disc brakes in my 1963 GMC and I really can't afford new spindles but I have a set of spindles from a 72 C10 and I was wondering if they will work if I change the ball joints to match the 72 spindles?
|
Re: Disc brake spindles
Yes that will work.
Quote:
|
Re: Disc brake spindles
Quote:
|
Re: Disc brake spindles
http://www.67-72chevytrucks.com/vboa...isc+brake+swap Here I used spindles from a 75. Pretty much the same process. Don't know about the tie rod end on a 72 verses a 75 though.
|
Re: Disc brake spindles
Quote:
|
Re: Disc brake spindles
Quote:
|
Re: Disc brake spindles
If you just change the entire steering linkage, you don't have to worry about those. The only thing about swapping the steering linkage is you will need to drill 2 holes to mount the newer idler arm. The one plus is that all your steering, ball joints and brakes will be from the same year truck. Much easier to remember when you need replacement parts.
Quote:
|
Re: Disc brake spindles
Quote:
|
Re: Disc brake spindles
I replied to your PM.......
|
All times are GMT -4. The time now is 10:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com