Ralley Wheel Dog Dish Conversion
 

So thinking about painting up a set of 15 x 8 talley wheels but want to do away with the center caps and snap on my 65 dog dish caps. Has anyone installed clips successfully to achieve this?

Re: Ralley Wheel Dog Dish Conversion
 

If you try this and figure it out, post with how you did it. I've got another car I was thinking about this on. ;)

Re: Ralley Wheel Dog Dish Conversion
 

I've thought about doing that with these clips. https://www.mobsteel.com/shop/mobsteel_clips/

Re: Ralley Wheel Dog Dish Conversion
 

Not mine but, something I found awhile ago.

Re: Ralley Wheel Dog Dish Conversion
 

Unless those are made from spring steel, I'm not sure how well they would hold or for how long.

Re: Ralley Wheel Dog Dish Conversion
 

Looks like there's room for 3 more...but agree on spring steel necessity...
Sam

Re: Ralley Wheel Dog Dish Conversion
 

Cool idea cause they mount on the three bolt holes that hold the stock cap.:metal:

Re: Ralley Wheel Dog Dish Conversion
 

Awesome idea. :)

Re: Ralley Wheel Dog Dish Conversion
 

Back to 1st post? , measurements would be appreciated.

Re: Ralley Wheel Dog Dish Conversion
 

The stock GM caps are 10 3/16" inner diameter. So your going to be aiming for that measurement. as your retention contact for clipping the caps.
Unless you find a clip style cap at 7 5/8". whole other ballgame.

Re: Ralley Wheel Dog Dish Conversion
 

Thanks , I was hoping some one that has done it with the Mobsteel style clips would have some idea where to mount them.

Re: Ralley Wheel Dog Dish Conversion
 

Here's some info. https://67-72chevytrucks.com/vboard/...d.php?t=492081 Not the clips I was talking about but it looks like it worked .