68 Long Stepper Build - Chyna
4 Attachment(s)
Well I bought the 68 Long Stepper. Was running a bit rough and rich. Backfired a lot while driving and such but once i ran the old gas out of her she stopped backfiring. He said he hadn't had her on the road in about a year. So i need t change some fluids and such. Was idling real high, dieseled just barely after i drover her for about an hour at hwy speeds. She also stalled after about 45 minutes at a stop. So I turned the idle down then though to adjust the mixtures. Did a quick research on the 1406 eldlebrock and adjusted the carb. It seemed like the screws were all the way opened. Turned them all the way right 1 at a time and adjusted them out eventually to 2.5 turns each. Seems to be running a bit better but we will see. She needs new rockers..Looks like someone did a crap job replacing the drivers side previously and there is some rusting just above the windshield which kinda scares me but all in all she is solid. Supports and floors are good. 350 Crate with about 35k miles on it and turbo 400 which currently reads 20 mph over...Guess i need a new speedo gear.
This will be an extremely slow build as my Mustang comes first so ill fix some minor things and then go from there |
Re: 68 Long Stepper Build - Chyna
Cool. subbed.
|
Re: 68 Long Stepper Build - Chyna
That interior looks nice.
|
Re: 68 Long Stepper Build - Chyna
Longstepper! Subbed.
|
Re: 68 Long Stepper Build - Chyna
Quote:
|
Re: 68 Long Stepper Build - Chyna
Im in ,I like it .
|
Re: 68 Long Stepper Build - Chyna
You can have the column that's in my truck now but it needs a little work.
|
Re: 68 Long Stepper Build - Chyna
Quote:
|
Re: 68 Long Stepper Build - Chyna
1 Attachment(s)
Windshield Washing Fluid Reservoir was completely missing and lines were cut. So I ran to Pull-A-Part on lunch and grabbed an S10 Reservoir with pump as well as the lines and a T connector :) $14
|
Re: 68 Long Stepper Build - Chyna
Got the reservoir mounted and found my luck is as usual. The pump was bad, so i had to go buy a new one. Now im up to $30...Tested the new pump and it works. Just need to wire everything up and run the lines to the nozzles
|
Re: 68 Long Stepper Build - Chyna
Looking good Jeff. I don't know how I'd missed your new acquisition. Look forward to checking it out some day.
|
Re: 68 Long Stepper Build - Chyna
Changed the oil, added coolant, installed a new pcv valve, and installed a doughnut on the down pipe to get rid of the exhaust leak. Driving pretty good so far....Exhausted so im done for the day...Wanted to wire up the my windshield washer pump and start on the stereo but just ran out of energy and my head is bumping
|
Re: 68 Long Stepper Build - Chyna
Well I got my windshield washer pump all hooked up but not working...The damn nozzle is clogged and looks like it was crimped on the end...BLAH! I cant win!!! lol Cant find new nozzles on LMC or EBAY..wtf!
|
Re: 68 Long Stepper Build - Chyna
Ordered some 5.25 pioneer speakers and a set mdf rings to build kick panels with...lol
|
Re: 68 Long Stepper Build - Chyna
Cool
|
Re: 68 Long Stepper Build - Chyna
I'm in!!!
|
Re: 68 Long Stepper Build - Chyna
Looks like a solid truck! Should be a fun project.
|
Re: 68 Long Stepper Build - Chyna
Looks like a pretty good truck to start with. I'm going to follow along too. I like really slow builds :) I have one too
|
Re: 68 Long Stepper Build - Chyna
I've got some nozzles Jeff.
|
Re: 68 Long Stepper Build - Chyna
I actually ordered a set from some guy... :)
|
Re: 68 Long Stepper Build - Chyna
3 Attachment(s)
Wire wheeled the drip rails on top, found bondo, painted it with rustoleum, put new seam sealer down, and then repainted it with matte black...Looks a little odd but atleast its protected.
Cut out the radio area and got the stereo area fitted. Then i converted my ashtray into a cup holder...I wanted it to be seamless but it didnt work out. The cup holder metal wasnt very weldable but i welded into the screw holes on the mounting part to get it fit into the ash tray area and then bolted the front to it...I tried to weld it on but as you can see it ruined the paint and wouldnt hold BLAH! |
Re: 68 Long Stepper Build - Chyna
Cool cup holder Jeff!!
|
Re: 68 Long Stepper Build - Chyna
Dang, buddy, I hope you didn't weld with those flip flops on! Ouch! lol
|
Re: 68 Long Stepper Build - Chyna
heh...try shorts, short sleeve shirt, and flip flops lol
|
Re: 68 Long Stepper Build - Chyna
Haha. Live dangerously. Did you rest it on your gas cap to weld it? Lol
|
All times are GMT -4. The time now is 11:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com