slammed 57
 

just joined, looks like a really good site.. heres the build i'am currently doing and where iam at...click on the link below is of from the beginning from another site that i belong to....would be a lot to up load if i started fresh.. but I'll add from this point on and update as i progress... please let me know what you think...the good AND the bad..LOL

my build from the beginning
http://www.trifive.com/forums/showthread.php?t=120146



http://www.trifive.com/forums/pictur...ictureid=55729

Re: slammed 57
 

Slammed 57, Cool looking 57 Chevy !! I'll be watching.

Harvey
1957 Chevy Stepside
1958 GMC Fleetside C4 build thread: http://67-72chevytrucks.com/vboard/s...=535686&page=6

Re: slammed 57
 

I'm in too!

Too bad I can't see your pics in your other thread..

Re: slammed 57
 

Really a nice looking truck!

Re: slammed 57
 

Good looking truck!

Re: slammed 57
 

Welcome.
Looks like a real nice truck from the pic here.
Can't see the ones in your link.
Kim

Re: slammed 57
 

Count me in :welcoem:

Re: slammed 57
 

Thanks everyone..

Re: slammed 57
 

here i transferred over from the other forum of all my build pic's....I built the frame my self ...i figured by the time i add a front clip and ad the rear clip like my last 57 truck i just might as well built a complete frame since there is only 3 ft left from adding the front and rear..

http://www.trifive.com/forums/pictur...ictureid=49949

http://www.trifive.com/forums/pictur...ictureid=49947

http://www.trifive.com/forums/pictur...ictureid=50020

http://www.trifive.com/forums/pictur...ictureid=50021

http://www.trifive.com/forums/pictur...ictureid=50022

http://www.trifive.com/forums/pictur...ictureid=50457

http://www.trifive.com/forums/pictur...ictureid=50458

http://www.trifive.com/forums/pictur...ictureid=50459

http://www.trifive.com/forums/pictur...ictureid=51848

http://www.trifive.com/forums/pictur...ictureid=51940

http://www.trifive.com/forums/pictur...ictureid=51941

http://www.trifive.com/forums/pictur...ictureid=52088

http://www.trifive.com/forums/pictur...ictureid=52450

http://www.trifive.com/forums/pictur...ictureid=54299

http://www.trifive.com/forums/pictur...ictureid=54991

http://www.trifive.com/forums/pictur...ictureid=54995

http://www.trifive.com/forums/pictur...ictureid=54996


http://www.trifive.com/forums/pictur...ictureid=55731

http://www.trifive.com/forums/pictur...ictureid=55730

and this is where Iam at for the moment

Re: slammed 57
 

This is cool! Love your build table...awesome work!

Re: slammed 57
 

Nice chassis work, and nice build you have going. The angle of the shocks seem way off, and don't look like they would work, or is it just me?...Jim

Re: slammed 57
 

Very nice.
Kim

Re: slammed 57
 

That is some mighty fine chassis work!!

Re: slammed 57
 

Thanks All, MUCH appreciated!

Re: slammed 57
 

Totally agree, BUT shocks dampen spring oscillation. On bags there are no "springs" per se but I still have to believe if that upper shock mount were moved up to as close to the top of the frame notch as possible the function would be exponentially better.

Looks like he might have to lightly notch the lower bag mount and since I'm not an air bag kinda guy I don't know if inflating the bag ONLY extends its length or if its diameter also grows a little. Cause if it does, it will limit how upright he can move the shock. But otherwise some VERY nice fab work.

Re: slammed 57
 

Very nice sofar. How much did you pay for your fenders and doors if you don't mind me asking?

Re: slammed 57
 

Thanks Dan, I'll look into relocating . I did have the same set up on my last truck I and it rode fine. But I do see your point.

Re: slammed 57
 

Tan man . I paid right around $1500 for 2 front fenders and 2 doors...But I strongly suggest trying to find some originals even if you have to do some rust repairs... this new sheet metal sucks, for I still have to do some cutting and reshaping

Re: slammed 57
 

Looks like a nice project. looking forward to this one.

Marc

Re: slammed 57
 

well after a couple of weeks of working on the truck i finally have a little progress that i can report. I installed the driver side step and floor... and if you been following my thread , I mentioned how hard of a time i was having aligning the door ,cab and fenders up. Well come to find out the guy who had the truck before installed new steps ( but with the cheaper sheet metal step which is a thinner gauge and no support) but after cutting the old step out i noticed the cab door jams were torqued out of shape , which i can only assume that he didn't re-enforce the cab when he cut out the original steps...but after many measurements of a older cab a friend had , I finally got them back in to shape...at least for the driver side....I sill have to do the passenger side...But with that said the door fits GREAT now!!


http://www.trifive.com/forums/pictur...ictureid=57548

I also scraped up enough dough for these guys!
http://www.trifive.com/forums/pictur...ictureid=57549
http://www.trifive.com/forums/pictur...ictureid=57550

as you can see the cab,door and fender alignment is much better.. Thank GOD!!!!
http://www.trifive.com/forums/pictur...ictureid=57551

Re: slammed 57
 

Nice work on straightening out the cab! Always appreciate new parts just coming out of the box.

Re: slammed 57
 

Repair looks real nice, so do the goodies.
Kim

Re: slammed 57
 

Nice repairs to someone else's goof up...Jim

Thanks ALL , it's much appreciated
Posted via Mobile Device

Re: slammed 57
 

Cab is looking very straight!
Nice trans!!