The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)
-   -   IDIDIT Steering Column's Always Free shipping and on sale! (https://67-72chevytrucks.com/vboard/showthread.php?t=642583)

MCB Matt 09-08-2014 07:06 PM

IDIDIT Steering Column's Free shipping BEST PRICES! - I REFUSE TO SELL THE CHINA JUNK
 
I WILL NOT SELL THOSE CHEAP $200-300 CHINA JUNK COLUMN'S SOME OTHERS SELL! I KNOW WAY TOO MUCH ABOUT THEM AND HOW THEY ARE MADE AND HOW MANY FAIL AND WHAT'S DONE TO TRY TO FIX THEM... I VALUE MY STEERING A LITTLE TOO MUCH TO SAVE A FEW HUNDRED $$ IN A 5 FIGURE TRUCK BUILD! BUYER BEWARE!

IDIDIT column's are made in the USA and they are made to FIT THE VEHICLE YOU PURCHASE THEM FOR!!!

We are a Full Line direct dealer.

Just let us know what you need and we will quote it out for you!

Free shipping in the 48 states.

Forum Discounts!

Thanks
MCB

MCB Matt 09-11-2014 01:21 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Special - Through the End of September - HALF OFF POWDER COATING OR CHROME FINISH!!!

PM, Email or Call for your forum price, we will not be undersold on IDIDIT! We have been selling their column's longer than a lot of companies have been in business, they are top notch products and a great group of people for us to work with on the wholesale side!!

Let us know if you need Floor or Column shift, what finish and any accessories like the install kit, Cruise control, ect!

Thanks for helping keep us in IDIDIT's top dealer group!
MCB

MCB Matt 09-17-2014 02:58 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
The ONLY way to go!!

Don't run the CHEAP chine chrome column's guys... I have inside word from a direct importer that buys these by the CONTAINER load from china for $50ea...

They are crap, the turn signal switches usually fail within 500 miles and the bearings are horrible, tolerances and overall built quality is just not worth the savings...

This is FAR too important of a part to chance when you are crusing down the highway at 75 and the end snaps!!!

MCB

Woodnears 09-17-2014 09:40 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Pm me on an unfinished tilt non shift for a 68

MCB Matt 09-18-2014 12:46 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Woodnears (Post 6847197)
Pm me on an unfinished tilt non shift for a 68

PM on the way!
Thanks
Matt

MCB Matt 09-24-2014 04:39 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy Hump Day!

MCB

MCB Matt 09-24-2014 07:52 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
:mm:

78f1hundo 09-25-2014 07:00 AM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
PM me on an unfinished tilt auto shift for a 65 C-10 & chrome price too...

Thanks

BB72CHEVKT 09-25-2014 10:41 AM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
unfinished with everything to install, please

MCB Matt 09-25-2014 01:05 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 78f1hundo (Post 6855952)
PM me on an unfinished tilt auto shift for a 65 C-10 & chrome price too...

Thanks

PM sent!
Thanks
Matt

MCB Matt 09-25-2014 01:06 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by BB72CHEVKT (Post 6856085)
unfinished with everything to install, please

PM on the way!
Thanks
Matt

71meangreenc10 09-26-2014 10:32 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
PM for unfinished column tilt for 71.

Thanks,

Smitty

C10_ustacould 09-28-2014 12:01 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Unfinished, tilt, column shift for a 71 to 32578. Thanks

MCB Matt 09-29-2014 01:24 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 71meangreenc10 (Post 6858052)
PM for unfinished column tilt for 71.

Thanks,

Smitty

PM on the way.
Thanks
Matt

MCB Matt 09-29-2014 01:27 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Bucks68 (Post 6859340)
Unfinished, tilt, column shift for a 71 to 32578. Thanks

PM coming
Thanks
Matt

Cjwhite28 09-29-2014 01:47 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
would like to price out

Unfinished, tilt, column shift for a 71 shipped to 14303

Unfinished, tilt, floor shift for a 71 shipped to 14303

thanks

MCB Matt 09-29-2014 01:51 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Cjwhite28 (Post 6860774)
would like to price out

Unfinished, tilt, column shift for a 71 shipped to 14303

Unfinished, tilt, floor shift for a 71 shipped to 14303

thanks

PM on the way!
Thanks
Matt

CG 09-29-2014 10:51 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Can you get these in paintable plain steel, tilt, and without column shift? I don't really want to have to pay extra for stainless or chrome.

68basket 09-29-2014 10:53 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Can you price a column for my 1960 chevy parkwood wagon. column shift, everything needed to install. I am unsure of any options etc.

MCB Matt 09-30-2014 02:20 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by CG (Post 6861457)
Can you get these in paintable plain steel, tilt, and without column shift? I don't really want to have to pay extra for stainless or chrome.

Yes, IDIDIT offers, plain (looks like brushed aluminum), Black powder coated, chrome, Brushed aluminum and polished aluminum.

Column or floor shift

Thanks
Matt

MCB Matt 09-30-2014 02:20 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 68basket (Post 6861460)
Can you price a column for my 1960 chevy parkwood wagon. column shift, everything needed to install. I am unsure of any options etc.

Sure, PM on the way!
Thanks
Matt

CG 09-30-2014 09:55 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by MCB Matt (Post 6862091)
Yes, IDIDIT offers, plain (looks like brushed aluminum), Black powder coated, chrome, Brushed aluminum and polished aluminum.

Column or floor shift

Thanks
Matt

Hit me with a price on the plainest of plain Jane tilt, but no column shift units you have.

MCB Matt 10-01-2014 02:07 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by CG (Post 6862662)
Hit me with a price on the plainest of plain Jane tilt, but no column shift units you have.

PM on the way!
Thanks
Matt

BrentRS1985 10-01-2014 04:48 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
I'm interested in a chrome tilt column shift for my '69 c10. I don't know what options are available, please let me know.

MCB Matt 10-02-2014 12:44 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by BrentRS1985 (Post 6863663)
I'm interested in a chrome tilt column shift for my '69 c10. I don't know what options are available, please let me know.

PM on the way!
Thanks
Matt


All times are GMT -4. The time now is 03:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com