Power Steering Bracket for an Inline 6
 

How hard is it to get a complete power steering bracket for an inline 6? A buddy at work just bought a 72 long bed with an inline 6 and wants to put power steering on it.

Re: Power Steering Bracket for an Inline 6
 

If the motor is a 194, 230 or 250 they are around, but a little hard to find. Those engines also came in cars so there are more of them out there. If it is a 292, GOOD LUCK!! Those motors only came in 3/4 ton and up trucks and vans and power steering setups for those are rare. Start checking "big truck" junkyards for bobtails, step vans,etc.

Re: Power Steering Bracket for an Inline 6
 

ttt

Re: Power Steering Bracket for an Inline 6
 

I just listed one on the parts board several weeks ago. Unfortunately, it's only 1 of 3 pieces needed, but perhaps you can come up with the other 2 somehow.
http://67-72chevytrucks.com/vboard/s...d.php?t=256257

Re: Power Steering Bracket for an Inline 6
 

I found one in a mid 70's (i think) Chevy van with a 250 at the Junkyard. Sold it on here for about $100

Re: Power Steering Bracket for an Inline 6
 

are the later model 250s the same as our trucks? i have a 79 gmc with a 250 and power stearing

Re: Power Steering Bracket for an Inline 6
 

The 292 was avail in half tons as well mine has one with ps and the brackets will be on the parts board in a few months as I am doing a 350 swap. Just curious what is a complete set worth?

Re: Power Steering Bracket for an Inline 6
 

i've seen 292 brackets go for $200+ (higher on Ebay)

Re: Power Steering Bracket for an Inline 6
 

I think in 79 they were all using the integrated head and those are supposed to be different. I am using one from an integrated head on mine, which is not an integrated head, but I had to get the water pump pulley as well and move the balancer slightly because it sits 1/4 inch off, but after that it is perfect.

Ebay is the best source for these brackets. Expect to pay at LEAST $75 tho, otherwise hit the yards if you have any around your area.

Re: Power Steering Bracket for an Inline 6
 

Can anyone post some pictures of the brackets so we can look for the correct ones?

Re: Power Steering Bracket for an Inline 6
 

I have a set for a 292 if that's what you're looking for. I'll be using them on the burb. 250 set up is different.
I'll try to get some pictures posted. BTW I paid $20 for my set-up including the pump SCORE!!

Re: Power Steering Bracket for an Inline 6
 

Here are the one's that I sold...

http://www.67-72chevytrucks.com/vboa...d.php?t=252137

Re: Power Steering Bracket for an Inline 6
 

Here's the top bracket:

Re: Power Steering Bracket for an Inline 6
 

Here is a pic of the bracket installed, but not the pump:

http://www.grossepointegothic.com/71...e/hpim0265.jpg

Here is a pic with the pump installed, this also shows what happens when you use a bracket from an integrated head 250.

http://www.grossepointegothic.com/71...e/hpim0273.jpg

Re: Power Steering Bracket for an Inline 6
 

I have a 69 chevelle that has the problem that is pictured on the bottom it has a head on it off of a newer engein what do I need to get the power stearing pump strate.

Re: Power Steering Bracket for an Inline 6
 

There is a guy on E-bay that makes and sell those and a/c brackets as well. I have a 64 C60 that I'm planning on adding power steering to

Re: Power Steering Bracket for an Inline 6
 

I still have these.
http://67-72chevytrucks.com/vboard/s...d.php?t=517527

Re: Power Steering Bracket for an Inline 6
 

I would use one of THESE.

Re: Power Steering Bracket for an Inline 6
 

yes davis speed shop sells inline six power steering ,alt and a/c brackets.you can find him on ebay.he makes them his self i just put one of his on my 1970 1/2 ton 292 this week, very good set up. but you will need to see what pump you are going to use, he has the setup for several . hopes this helps. the power steering bracket was 156.00 shipped. it is very well made.

Re: Power Steering Bracket for an Inline 6
 

What did the set-up originally come off of? Did you use the pulley's from the donor? Is your power steering pulley out of alignment by a full groove with regards to the WP pulley? A pic would be helpful.

Re: Power Steering Bracket for an Inline 6
 

My power steering pulley is out of alignment, like you staded above. What do I need to do to correct it?