71/72 Gas Pedal On 67
So got everything to set up a 71/72 gas pedal in the 67. While mocking everything up it seems like the cable is to long. Has anyone ran in to this problem? Can someone measure their cable to make sure I got the right one.
Thanks http://i483.photobucket.com/albums/r...psajuoybzh.jpg |
Re: 71/72 Gas Pedal On 67
Where are you going to mount it on the fire wall?
|
Re: 71/72 Gas Pedal On 67
71/72 cable used a ball/socket connection to the carb. That cable pictured has a different end on it and I would guess it is from a 73-up truck
|
Re: 71/72 Gas Pedal On 67
Quote:
|
Re: 71/72 Gas Pedal On 67
That big turn in the cable will wear through the sheath. Or mine did...
|
Re: 71/72 Gas Pedal On 67
Quote:
Quote:
It looks like they made to different ones. 2wd and 4wd. http://sokyclassics.com/product.php?section=1000825 |
Re: 71/72 Gas Pedal On 67
Quote:
|
Re: 71/72 Gas Pedal On 67
Quote:
The one I have measured to 10". Would like to see how other buys dealt with this. |
Re: 71/72 Gas Pedal On 67
It looks like you are in the 6 cyl position so you may need the shorter 4x4 cable.
|
Re: 71/72 Gas Pedal On 67
Quote:
Quote:
|
Re: 71/72 Gas Pedal On 67
Yes the 73+ cable is longer than a 2wd cable (I verified this past weekend at the junkyard) yes from the factory the original cable had an arc in it, and the 4x4 cable is roughly 2 inches shorter from what I understand.
|
Re: 71/72 Gas Pedal On 67
Quote:
|
Re: 71/72 Gas Pedal On 67
Anyone find out what the length is?
|
Re: 71/72 Gas Pedal On 67
ttt
|
Re: 71/72 Gas Pedal On 67
Sorry I didn't understand your PM to my 2012 post.
You can cut the sleeve down and shorten the cable at the pedal. I took 1/2" out of mine. |
Re: 71/72 Gas Pedal On 67
Quote:
Thanks for the help. |
Re: 71/72 Gas Pedal On 67
I cut the sleeve at the front, where the mount casting meets the sleeve. 1/2" was just enough to keep the sleeve under tension when you mount it in the firewall I can show you better on my computer tomorrow.
|
Re: 71/72 Gas Pedal On 67
1 Attachment(s)
I didn't know there were so few sizes used. I needed a non-standard size, because it is for a 4BBL, mounted sideways on a 6 cylinder. I mounted the hanging pedal first, which I would recommend and then collected four different cables from the wrecking yard.
A tight turn shouldn't wear the cable out unless the return spring is too heavy. Mine loops around behind the PCV valve and returns back across the valve cover. Been that way for eight or nine years. If I am recalling correctly, one of the three screw locations that mounted the original '67 throttle arm was reused for the hanging pedal. I don't remember exactly. I do remember that as I was doing it, I was glad the engine was out at the time. There are some holes that need welded closed and three new nuts tack welded in place. |
Re: 71/72 Gas Pedal On 67
1 Attachment(s)
Sorry for the delay. Oem 71/72 cable is 20"
|
All times are GMT -4. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com