Originally Posted by vectorit (Post 8000594)

When I did mine a couple years ago, myself and my upholstery shop could not find anyone making 2nd row size foam.

I haven't looked recently, but I'm betting there still isn't anyone making pre formed foam like the 1st row yet.

What I do know, is that the pre formed foam replacements are super expensive. So plan for sticker shock.

Originally Posted by vectorit (Post 7498895)

This thread is only for OE seats for 67-72 Suburbans.
There are often questions pertaining to type of benches, and what type of brackets and hold downs were used.
So I thought that this should be a sticky thread, and for reference only when it comes to the Original Equipment seating of the 67-72 Suburban.

This includes brackets, and upholstery that were Original to the 67-72 Chevrolet and GMC Suburbans.

Often FAQ's

Will a 1972 bench seat work in my 1967 Suburban - Yes
All 67-72 benches will interchange.

Are the brackets reproduced, who makes them? - At this time 02/2016 no one is making brackets.

Are the hold down brackets reproduced, who makes them? - Yes, these can be found from various vendors. But be sure to include Blazers in your search, since often times they are sold only as Blazer brackets.

Originally Posted by vectorit (Post 8043643)

It has the short rear brackets, so I would think that this is a 2nd row bench.

Originally Posted by vectorit (Post 8043656)

I don't recall the exact measurement of what I call the "short bench", but like my burb I have a short bench as a second row. This same bench fits just fine as a 3rd bench between the wheel wells, and could be converted to a 3rd bench if I set it up with 3rd bench brackets.

So what you may have here is just a 2nd row short bench. GM offered full length and short benches for the second row.

Originally Posted by mrtoni (Post 8069598)

Can’t quite get my head around this. I have two blazer rear seats. These will fit as second and third row in my burb? Will either blazer bracket work or what do I need?

Originally Posted by mrtoni (Post 8169257)

So my burb has a full length 2nd row seat. 58 inches. No third row but I want to add one. I have two blazer benches both 50 inches. I believe looking at factory diagram that second and third row are both 50 inches. I probably can change full length mounts from second row onto shorter third row? Matt

Originally Posted by kbrown (Post 8172541)

I found a second row seat for a 1975 Blazer, The bolt holes in my 72 burb measure about 42 in. for the third row seat the blazer seat rear brackets measure 35 1/2. does anyone know if the brackets can be moved on the blazer seat or would I have to relocate the holes in mv 72.
Thanks
Kevin

Originally Posted by vinro (Post 8328234)

Wondering if anyone can post pics and specs of oem bolts for securing 2nd row center and 3rd row rear (RPO A80) - hoping to get info relating to a 1967 Suburban.

Originally Posted by vinro (Post 8328234)

Wondering if anyone can post pics and specs of oem bolts for securing 2nd row center and 3rd row rear (RPO A80) - hoping to get info relating to a 1967 Suburban.

Originally Posted by 3.d.autorepair (Post 8372145)

I have a 69 burb with all three row of seats. I need to get new seat covers, some foam for the front seat, some mounting brackets for the seats to the floor, seat belts and the ash trays for the rear 2 rows. Anyone know of a good place to purchase these items?