The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 Chevy and GMC Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   2005 gmc 1500 z-71 (http://67-72chevytrucks.com/vboard/showthread.php?t=753485)

barry1982 12-27-2017 11:10 AM

2005 gmc 1500 z-71
 
Hi Guys, I just picked up an 05 GMC. Having starter trouble, one of the bolts that holds starter to engine block was extremely hard to remove. Discovered the threads on bolt are "galled". Want to clean up the bolt, and run a tap into block before installing new starter. Needed a 13mm socket to remove bolt, so thinking bolt is metric. Does anyone know the correct metric size and thread pitch? Need this info so I can get the correct tap/die. Thanks.

greasemonkey 12-27-2017 08:49 PM

Re: 2005 gmc 1500 z-71
 
Should be an m10x1.5.

95 S_Trucker 12-27-2017 10:18 PM

Re: 2005 gmc 1500 z-71
 
A thread chaser would be better than a tap.

barry1982 12-29-2017 12:18 AM

Re: 2005 gmc 1500 z-71
 
Thanks Guys.... M10 x 1.5 is the correct size. I chased the bolt with a die, and picked up a tap to run into the block.


All times are GMT -4. The time now is 06:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com