The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   99+ Chevy and GMC Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=59)
-   -   AR Wanted gm part #12558927 (https://67-72chevytrucks.com/vboard/showthread.php?t=751619)

mingoman 11-30-2017 06:45 PM

Wanted gm part #12558927
 
If anyone has one gathering dust, I'd like it. It's the correct ac/ps bracket to use on the 8.1L I'm swapping in my 97 crew cab. I can find all the other brackets, water pump, and balancer, but still looking for this. They used this setup in workhorse rv's and G series vans.
Thanks!

rreichert82 01-19-2018 02:05 PM

Re: Wanted gm part #12558927
 
I just purchased a #12563068 from a C4500. It takes the ZF style PS Pump. I am doing a swap into a 79 Trans Am so I do not need the heavy duty steering pump so I am looking for the #12558927 so I can run the Saginaw style in mine. If I can find the smaller pump bracket I would be looking to get rid of the ZF style if you are interested.

izzy_Britton 01-20-2018 09:48 PM

Re: Wanted gm part #12558927
 
I have an 8.1 with saginaw pump, is this the one your looking for?
Posted via Mobile Device

rreichert82 01-20-2018 10:11 PM

Re: Wanted gm part #12558927
 
The brackets are dependent on what they were installed in. If they were in a truck or SUV the alternator is on the drivers side and the a.c. compressor is on the lower passenger side. If you want to run a.c. at least for me there is not enough clearance. The brackets from the motorhomes, vans, and medium duty trucks move the alternator to the passenger side and the a.c. compressor on the upper driver side. The medium duty truck bracket that I have is designed for the ZF style pump. The motor home and van units typically have the Saginaw style pump. The big challenge on getting either bracket is GM has discontinued the part and most salvage yards do not inventory brackets so they are hard to find.

mingoman 03-17-2018 02:44 PM

Re: Wanted gm part #12558927
 
Quote:

Originally Posted by rreichert82 (Post 8165055)
I just purchased a #12563068 from a C4500. It takes the ZF style PS Pump. I am doing a swap into a 79 Trans Am so I do not need the heavy duty steering pump so I am looking for the #12558927 so I can run the Saginaw style in mine. If I can find the smaller pump bracket I would be looking to get rid of the ZF style if you are interested.

I may, let me check into how the bigger pump would fit my truck. I'm putting the 8.1L in my 97 cclb.

rreichert82 03-17-2018 02:47 PM

Re: Wanted gm part #12558927
 
Let me know. I have everything i need on my end so i have a brand new #12563068 bracket.

mingoman 03-18-2018 05:12 PM

Re: Wanted gm part #12558927
 
Quote:

Originally Posted by rreichert82 (Post 8214071)
Let me know. I have everything i need on my end so i have a brand new #12563068 bracket.

I'm still checking, but I noticed Larry, the 8.1L swap guru, said the ZF pump wouldn't work in older trucks. I sent him a pm asking about the 88-98 trucks just in case. Seems like there's enough demand for these that someone would make a few lol.

mingoman 03-20-2018 12:47 PM

Re: Wanted gm part #12558927
 
Quote:

Originally Posted by rreichert82 (Post 8214071)
Let me know. I have everything i need on my end so i have a brand new #12563068 bracket.

Sent you a pm.

a1vintage69 03-22-2018 08:50 PM

Re: Wanted gm part #12558927
 
http://oemcats.com/oem-parts/12558927.html

rreichert82 04-02-2018 04:15 PM

Re: Wanted gm part #12558927
 
I tried to by a bracket from that site before and they ended up canceling my order and refunding because it was a discontinued part. I had a local large truck repair shop find a NOS part on a dealer shelf for me and had to pay their markup and shipping to find the one I have. I replied to your PM. I apologize I did not have my email notifications turned on.

mingoman 04-03-2018 03:03 AM

Re: Wanted gm part #12558927
 
Quote:

Originally Posted by rreichert82 (Post 8228253)
I tried to by a bracket from that site before and they ended up canceling my order and refunding because it was a discontinued part. I had a local large truck repair shop find a NOS part on a dealer shelf for me and had to pay their markup and shipping to find the one I have. I replied to your PM. I apologize I did not have my email notifications turned on.

No problem, apparently I have mine turned off as well somehow. My zip code is 72315 so you can get the shipping cost figured and thanks!


All times are GMT -4. The time now is 07:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com