The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   My first blazer!! (https://67-72chevytrucks.com/vboard/showthread.php?t=720048)

aboesec10 10-12-2016 10:26 PM

My first blazer!!
 
2 Attachment(s)
Hey guys! Im over from the 67-72 side as I've got a new project and I know this board is awesome for help etc. I bought the blazer last weekend and its titled as an 81 with a matching vin number but has a 91 front end and the tbi 350..... Wont really matter as I plan to ls swap it anyhow.. Ill throw up a couple of pictures as it sits now and post progress throughout. I have a ton of questions as the square body platform is new to me..

aboesec10 10-12-2016 10:29 PM

Re: My first blazer!!
 
Im currently trying to figure out the power window situation as the connectors for the switches have seen better days. Anybody know where to get replacement connectors? Putting new motors in the doors as well. The gate works well but i need to clean up the latch area where the safety switch is as it doesnt always make a good connection.

aboesec10 10-12-2016 10:31 PM

Re: My first blazer!!
 
Plans for this thing ( to be named later) include new paint and body, including a color change and the top to either be body color or white. Shave off the trim and emblems, New wheels and tires, bumpers, smaller mirrors, and redo all the upholstery. And a 5.3 ls with a 4l60 swap.

bmchevy1979 10-13-2016 09:47 PM

Re: My first blazer!!
 
I believe LMC carries the switch connectors and use A.C. Delco motors if you can I didn't on one door of my old 87 because they weren't in stock and my window was down in the winter when it quit but it was slower than the original in the other door. I have heard allot of people say to bypass that switch cause it causes problems and on mine it was stuck on so it didn't even do its job also lube all the tracks and mechanisms while your in there as these gates do get hard to open over time if they aren't kept lubricated

68Timber 10-14-2016 01:42 PM

Re: My first blazer!!
 
Welcome! Did you price the window motors with new regulators? They're probably not much more for the whole assembly and the motors will work better with the new wheels. Classic Parts has new switches and connectors. And member gmachinz makes and sells wiring harnesses for the windows with the 'express down' feature if you like.

aboesec10 10-14-2016 07:26 PM

Re: My first blazer!!
 
sweet! ill definitely be in touch with him about those!

aboesec10 10-25-2016 09:44 PM

Re: My first blazer!!
 
man, Im not finding a gmachinez on here.......

68Timber 10-26-2016 08:37 AM

Re: My first blazer!!
 
No "e", just gmachinz.

aboesec10 10-31-2016 04:38 PM

Re: My first blazer!!
 
2 Attachment(s)
amazing what a new pair of shoes will do.....

68Timber 10-31-2016 05:27 PM

Re: My first blazer!!
 
Yep! They almost make the purple look good. If it were plum crazy?

aboesec10 11-01-2016 09:36 AM

Re: My first blazer!!
 
Right!?! Not gonna be purple though.....

aboesec10 11-01-2016 09:38 AM

Re: My first blazer!!
 
when the rear glass is rolled all the way down, should it be flush or inside of the gate, or stick up a little above the gate? mines sticking up a little when rolled down and I'm curious if thats normal or if i need to adjust it...

68Timber 11-01-2016 10:06 AM

Re: My first blazer!!
 
It should go all the way in the 'gate.

aboesec10 11-01-2016 10:10 PM

Re: My first blazer!!
 
ok, ill pop it apart and see whats stopping it.

aboesec10 11-01-2016 10:12 PM

Re: My first blazer!!
 
another question..... The rear seat has 3 seat belts, the middle seat obviously is pretty self explanatory as both ends are there, however the buckles on the side belts I'm confused by. They retract and extend from the seat however i can't figure out where they buckle to... What am I missing??

aboesec10 11-09-2016 09:08 AM

Re: My first blazer!!
 
1 Attachment(s)
one with the top on...

aboesec10 11-14-2016 10:44 AM

Re: My first blazer!!
 
hoping to have this sucker flat black this weekend. got it sanded and bodywork done for the most part. a few areas still to do....

aboesec10 11-21-2016 10:23 AM

Re: My first blazer!!
 
2 Attachment(s)
got the seat belt situation figured out... Also did a little more metal work on the tailgate.

aboesec10 11-21-2016 10:24 AM

Re: My first blazer!!
 
I think I've got all the metal work done now, Hoping to start bodywork this weekend...YAY!!!

PEDROSKI 11-26-2016 03:29 PM

Re: My first blazer!!
 
What is the plan to bring the window up and down?

aboesec10 11-26-2016 05:17 PM

Re: My first blazer!!
 
Quote:

Originally Posted by PEDROSKI (Post 7778524)
What is the plan to bring the window up and down?

What do you mean? as far as the rear... Its just a switch so ill hide one somewhere. Theres still the one in the dash. Thinking ill do an alarm with keyless entry and have it hooked up to the remote to lower and raise.....

aboesec10 11-26-2016 05:18 PM

Re: My first blazer!!
 
2 Attachment(s)
its going a little slower than id like but the purple is finally gone!!!

aboesec10 11-26-2016 05:21 PM

Re: My first blazer!!
 
1 Attachment(s)
this is the color Im thinking. Its b50 sakhir orange metallic from bmw

aboesec10 11-26-2016 05:26 PM

Re: My first blazer!!
 
2 Attachment(s)
from start to where i am now, Still a lot to do but its looking better...

schpeen 11-26-2016 10:34 PM

Re: My first blazer!!
 
Quote:

Originally Posted by aboesec10 (Post 7778599)
from start to where i am now, Still a lot to do but its looking better...

can i buy your old mirrors?

raggedjim 11-27-2016 12:15 PM

Re: My first blazer!!
 
Nice work, my first blazer was a 77.

Rg

aboesec10 11-27-2016 12:27 PM

Re: My first blazer!!
 
Quote:

Originally Posted by schpeen (Post 7778902)
can i buy your old mirrors?

you could man, but their far from perfect.

aboesec10 11-27-2016 12:29 PM

Re: My first blazer!!
 
1 Attachment(s)
one more

PEDROSKI 11-30-2016 09:32 PM

Re: My first blazer!!
 
Lookin good

schpeen 11-30-2016 09:38 PM

Re: My first blazer!!
 
seriously nice! did you take your side slider windows apart by chance?

schpeen 11-30-2016 09:40 PM

Re: My first blazer!!
 
Quote:

Originally Posted by aboesec10 (Post 7779280)
you could man, but their far from perfect.

so is my blazer! lol they will feel right at home

aboesec10 12-02-2016 10:41 AM

Re: My first blazer!!
 
Quote:

Originally Posted by schpeen (Post 7783439)
seriously nice! did you take your side slider windows apart by chance?

i didn't, Im actually gonna swap them to 1 piece for a cleaner look. The passenger side slider is cracked anyhow

aboesec10 12-19-2016 10:21 AM

Re: My first blazer!!
 
1 Attachment(s)
the 5.3 and 4l60 are here, Gotta finish up another project and then ill clean this baby up and swap it into the blazer.

aboesec10 12-30-2016 11:23 PM

Re: My first blazer!!
 
2 Attachment(s)
got my "new" seats!! working on installing them tonight and will finish up tomorrow. Then i have to figure out the wiring for them. Their from a trailblazer with power options. Not sure what all they have as the pigtail for the drivers side has 17 wires..... wasn't expecting that for sure..

aboesec10 01-09-2017 10:20 AM

Re: My first blazer!!
 
3 Attachment(s)
had a busy weekend, got the ls all cleaned up and painted. Then started the teardown on the blazer..

aboesec10 01-09-2017 10:23 AM

Re: My first blazer!!
 
4 Attachment(s)
will finish cleaning of the firewall tonight and start prepping it for paint. Hoping to have the engine and transmission in this weekend. Then ill drop the tank and change fuel pump etc. Headers should be here next week. I was happy to find zero rust in the firewall!!!!!!!

Mr.Chevy4x4 01-09-2017 10:58 AM

Re: My first blazer!!
 
Dang man, you were busy! Keep up the good work! Following....


Mike

aboesec10 01-12-2017 12:33 AM

Re: My first blazer!!
 
2 Attachment(s)
got the firewall sanded and prepped. Sprayed a little self etch on it tonight. Ill paint it tomorrow. Also got the chassis all cleaned up and painted. Haven't painted the control arms yet as Im about to change ball joints, inner and outer tie rods and wheel bearings. That way i know their all new and good to go....On a side note i sold the tbi 350 already so thats good too, less clutter in the garage.:devil::devil:

aboesec10 01-12-2017 09:50 PM

Re: My first blazer!!
 
4 Attachment(s)
:devil::devil: and we've got color!!!!!!:devil::devil:

aboesec10 01-12-2017 09:51 PM

Re: My first blazer!!
 
garage lighting is killing the color in the photos. Im thinking the chevy orange on the engine has to go. It'll clash big time I'm afraid.....


All times are GMT -4. The time now is 11:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com