wtb burb tail light "tub"
 

I am looking for a suburban tail light tub. Not the housing where the bulb is but the surround that is usually tack welded behind it.

Looking for drivers side if there is a difference, or both if someone has a pair and does not want to part. Decent is ok.

Thanks,

Re: wtb burb tail light "tub"
 

give these guys a shout there local out here and they carry alot of burb parts. I bought a new drivers side tub from them. http://www.dreamershotrods.com/

Re: wtb burb tail light "tub"
 

Thanks for the lead.

I will call but it looks like what they have is the corner panel. What I am needing is the maybe 8" x 4" inch tub that is spot welded onto the back of that. The part with the bulb then screws onto the "tub" that I am after. The left corner had been smashed and that part was going to be too hard to save.

Re: wtb burb tail light "tub"
 

Can you post pic or parts diagram photo of what you need exactly?! I am beginning to part a burb that is complete.
Posted via Mobile Device

Re: wtb burb tail light "tub"
 

I will post a couple tonight. Thank you

Re: wtb burb tail light "tub"
 

A couple of pics. The first one shows the driver side rear corner with the "tub" placed in by hand. The second is the right side where the "tub" in in place (spot welded on the upper and lower tab" and the bulb/lens holder has been screwed in.

Re: wtb burb tail light "tub"
 

No problem I have you covered...I will pull it on Monday get a pic posted and we can go from there buddy...


Adam

Re: wtb burb tail light "tub"
 

Here are a couple pics...the red is overspray is from a po cheap paint job.

http://i163.photobucket.com/albums/t...r/IMAG0942.jpg

http://i163.photobucket.com/albums/t...r/IMAG0943.jpg

$20.00 shipped...

Re: wtb burb tail light "tub"
 

Hey Adam, i think he meant the part that that bolts to. The piece thats actually spot welded into the body
Posted via Mobile Device

Re: wtb burb tail light "tub"
 

Budnikguy,

I did mean the part behind this part. It is part of the body as it is spot welded to small tabs on the sheet metal panel itself. Could be cut out if the corner was not otherwise usable. I can fix some bends or breaks. The piece does not come with aftermarket panel pieces. My pic is a little unclear as I look back at it. There would be "u" nuts on the two holes shown in the first picture.


Tim

Re: wtb burb tail light "tub"
 

I am parting a 70 Blazer but will not be home till next week. Did you get the part you needed? Thanks

Re: wtb burb tail light "tub"
 

It looks like suville in Idaho has one and just needs to get shipping for me.

Thanks

Re: wtb burb tail light "tub"
 

Good Deal, Thanks

Re: wtb burb tail light "tub"
 

Suville - got the tub. Thanks, that is exactly what I needed.

Re: wtb burb tail light "tub"
 

Budnikguy, If you still have this I will take it. Please pm payment info if you do have.

Re: wtb burb tail light "tub"
 

Yeah, I have them....my PayPal is
playersnmv@aol.com

Re: wtb burb tail light "tub"
 

Just sent money plus some to cover paypal fee. PayPal should give you my address. Thanks much