The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   GA 71 LWB Frame For Parts (https://67-72chevytrucks.com/vboard/showthread.php?t=678683)

uncle 08-06-2015 11:09 AM

71 LWB Frame For Parts
 
1 Attachment(s)
Disc brake setup $100, manual box 30 plus ship. Anything else ask and I'll price. Please respond in post.

uncle 08-06-2015 11:09 AM

Re: 71 LWB Frame For Parts
 
1 Attachment(s)
Bbbbbbbb

jasonmiddlebrooks 08-06-2015 03:06 PM

Re: 71 LWB Frame For Parts
 
What kind of shape is the rear right cab mount bracket and left front cab mount bracket?

Thanks

hr71c10 08-06-2015 03:34 PM

Re: 71 LWB Frame For Parts
 
How much for the entire rolling chassis minus the brakes and steering?

uncle 08-06-2015 10:00 PM

Re: 71 LWB Frame For Parts
 
Jason I should have some good mounts. hr71c10 so you want bare frame? Has no rear axle.

hr71c10 08-06-2015 10:05 PM

Quote:

Originally Posted by uncle (Post 7266010)
Jason I should have some good mounts. hr71c10 so you want bare frame? Has no rear axle.

I have the factory 12 bolt in my back yard I can put in there. I have converted leaf springs and I want to go back to coils and trailing arms. Is all the rear suspension stuff there? I'd also like the front upper and lower control arms to stay attached. I basically want to either cut my frame , weld this rear section in , or just swap all my stuff over to this frame. ( assuming the price is right that is)
Posted via Mobile Device

uncle 08-06-2015 10:11 PM

Re: 71 LWB Frame For Parts
 
$200. Everything there except track bar but I should have one.

hr71c10 08-06-2015 10:14 PM

Re: 71 LWB Frame For Parts
 
So I should be able to just put my rear end in and go then.
Posted via Mobile Device

hr71c10 08-06-2015 10:16 PM

Quote:

Originally Posted by uncle (Post 7266026)
$200. Everything there except track bar but I should have one.

Check your PM please
Posted via Mobile Device

uncle 08-11-2015 03:27 PM

Re: 71 LWB Frame For Parts
 
Bump. All parts still available.

uncle 08-19-2015 09:26 AM

Re: 71 LWB Frame For Parts
 
Bump

uncle 08-26-2015 05:06 PM

Re: 71 LWB Frame For Parts
 
Bump

uncle 09-02-2015 02:22 PM

Re: 71 LWB Frame For Parts
 
Bump

hotrodsinner 09-05-2015 10:44 PM

Re: 71 LWB Frame For Parts
 
You still have the center drag link?

uncle 09-06-2015 08:58 AM

Re: 71 LWB Frame For Parts
 
That one is gone but should have another 40 plus shipping.

hotrodsinner 09-07-2015 01:11 AM

Re: 71 LWB Frame For Parts
 
I picked one up. Thank you very much for the offer though.

ujsf01 09-07-2015 11:41 AM

Re: 71 LWB Frame For Parts
 
what is included with the disc brake setup?

uncle 09-07-2015 01:41 PM

Re: 71 LWB Frame For Parts
 
Everything but steering box and drag link. Spindles,rotors,calipers,a-frames lines and prop valve.

ujsf01 09-08-2015 02:41 PM

Re: 71 LWB Frame For Parts
 
cool, let me see if I can make travel arrangements. If somebody else grabs em first, that's understandable. If I can get arrangements made and it's still available, I want them.

yeahsee 09-09-2015 07:02 PM

Re: 71 LWB Frame For Parts
 
I am interested in the disc brake setup if "ujsf01" decides against it.
Please send cost to ship to zip 70808.
Thank you.

uncle 09-09-2015 09:55 PM

Re: 71 LWB Frame For Parts
 
I'd like to sell parts to you but shipping would be astronomical.

yeahsee 09-10-2015 06:23 PM

Re: 71 LWB Frame For Parts
 
Good point. I am really in need of a drivers side lower control arm but was going to buy all of your parts for spares. If you ever decide to part out the setup and sell the control arm let me know. Shipping on that shouldnt be too bad.

zicc1835 09-10-2015 07:01 PM

Re: 71 LWB Frame For Parts
 
1 Attachment(s)
Uncle
if you have i need this cab mount, mine is a SWB 1/2 ton frame i think they are the same
thanks
Jess

uncle 09-10-2015 09:10 PM

Re: 71 LWB Frame For Parts
 
Yeah see, I think I have a-frame off. Check tomorrow. Zicc1835 $10 plus ship.

zicc1835 09-10-2015 09:52 PM

Re: 71 LWB Frame For Parts
 
Quote:

Originally Posted by uncle (Post 7305081)
Yeah see, I think I have a-frame off. Check tomorrow. Zicc1835 $10 plus ship.

ok thanks


All times are GMT -4. The time now is 05:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com