Ls swap with hooker manifolds
Tried searching this but with a 5.3 / th350/ 205 in stock location (trans and transfer case havent moved) will a set of hooker exhaust manifolds fit without modifications?
|
Re: Ls swap with hooker manifolds
I have them in my swap but I have a 4l80 with the engine set forward. I have plenty of clearance. They look like they were made for it. I would think closer to stock they would fit even better based on how the frame tapers on mine. They set real close to the block for clearance.
|
Re: Ls swap with hooker manifolds
Thank you i went ahead and ordered a set.i will post a picture for future reference
|
Re: Ls swap with hooker manifolds
1 Attachment(s)
Maybe this will help someone one day
|
Re: Ls swap with hooker manifolds
1 Attachment(s)
Here’s mine
|
Re: Ls swap with hooker manifolds
So I was under the impression that you cannot put a 5.3 in stock V8 4x4 location with a turbo 350 because heads will hit firewall. By the looks of this thread that’s false!? I’m at a spot now trying to decide if 4l80/advance adapters/tcase mods are worth it. I’m guessing no... thanks and sorry for the hijack! Looks like I’ll use these manifolds too.
|
Re: Ls swap with hooker manifolds
I have not set my cab down yet so I hope doesn't have a issue
|
Re: Ls swap with hooker manifolds
I’m not sure if it would fit in the stock location since I went with the 4l80e. The 4l60e should handle the 5.3l. I went with the 4l80 due to the power of the ls3.
|
All times are GMT -4. The time now is 11:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com