The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   NEED!!! Torque Sequence and values for 350 head (https://67-72chevytrucks.com/vboard/showthread.php?t=122877)

Locutus 10-09-2004 03:42 PM

NEED!!! Torque Sequence and values for 350 head
 
the search seems to be broken again and I am trying to swap some heads on my truck I am almost to the point of putting the new ones on and I need the torque sequence and torque values for heads on a chevy 350.

Mike

Locutus 10-09-2004 03:49 PM

ttt

Locutus 10-09-2004 04:27 PM

why did new post start way at the bottom????

Nima 10-09-2004 05:08 PM

Based on Haynes manual, the torque for small block intake is 30. Based on edlebrock instruction, the torque for their intakes is 25, then I guess somewhere between 25-30 is ok based on the type of intake. For head, the torque is 65 for small block (based on Haynes). As far as the sequence goes, I have a picture and I'll try to post it, but for now I can just say they start from the middle and gradually goes to the both ends. I hope this helps.

tom hand 10-09-2004 07:43 PM

http://members.tripod.com/torquespecs/hi_po_chev.htm


All times are GMT -4. The time now is 06:05 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com