The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Champion radiator ? (https://67-72chevytrucks.com/vboard/showthread.php?t=767044)

65 GMC 07-07-2018 06:56 PM

Champion radiator ?
 
Can I run a stock shroud with the Champion radiator in my 64 C20 or do I need to run a electric one?

mongocanfly 07-07-2018 07:52 PM

Re: Champion radiator ?
 
Shroud or fan?.....if your gonna use a electric fan I'd just use champs.....you can get a pretty good deal on champs radiators with the fan and shroud already setup.....I'm fixing to get a combo here shortly myself...

guy0783 07-07-2018 08:32 PM

Re: Champion radiator ?
 
I put a 3 row champion radiator/shroud/fan combo in my K20 about 6 months ago with a 185 degree fan switch in the water neck.

Temp hasn't gotten above the middle of the gauge even in the 95 degree 95% humidity we've had in Oklahoma lately.

But with the 4 speed and 4.56 gears I cant say I spend much time at highway speeds.

Clyde65 07-07-2018 08:35 PM

Re: Champion radiator ?
 
Yes you can! I had that before my LS swap

Chevy Fleetside 07-08-2018 01:33 AM

Re: Champion radiator ?
 
http://www.speedcooling.com/1963_196..._Radiator.html Check these out before a champion radiator. Champions are pretty good. I do have one in my bb truck and with just a fan it cools ok. It is also a 4 row not a 3. The 3 was way to small for the BB,. This is one with there dual fan and shroud set up. http://www.speedcooling.com/1963-196...um-Shroud.html

66K20 07-09-2018 03:42 PM

Re: Champion radiator ?
 
Champion has a few radiator options for our trucks. If you pick one that is sized like factory, you should no problem using your factory cooling equipment, if desired.

The Champion EC284 (2 core, economy) is identical in size to the factory radiator in my 66 K20 with 292, with exception of being 1" taller. The total core thickness of the Champion is the same as the factory 3 core.

karlbenz 07-13-2018 06:56 PM

Re: Champion radiator ?
 
if you go to their site they have multiple options available. more so than on ebay. check out american eagle too. It's also Champion but has other options

AcampoDave 07-14-2018 12:39 AM

Re: Champion radiator ?
 
I know electric fans free up horsepower and all that, but I have no problems with an 18" six bladed clutch fan with a Hayden heavy duty clutch and a radiator from speedcooling.com I still use my o.e.m shroud too

LVPhotos 07-14-2018 10:32 AM

Re: Champion radiator ?
 
Quote:

Originally Posted by AcampoDave (Post 8300760)
I know electric fans free up horsepower and all that, but I have no problems with an 18" six bladed clutch fan with a Hayden heavy duty clutch and a radiator from speedcooling.com I still use my o.e.m shroud too

I took the fan and clutch off the 98 Durango 5.2L(318), it was over 20lbs. Now to say hp is saved and letting the weight off the water pump and letting the motor breath a little easier is different. I would not run an electric on my diesel I have come to trust them more after running in the desert prerunner all day.
But I will keep my copper V cell over aluminum til it dies.

AcampoDave 07-14-2018 08:38 PM

Re: Champion radiator ?
 
https://www.motortrendondemand.com/d...ut/0_olymz420/ really good stuff here.

63burban 07-15-2018 02:10 AM

Re: Champion radiator ?
 
Installed a Champion 2 core aluminum radiator with a factory fan shroud in my Suburban. Running a 90s tbi 350 with a clutch fan, runs great with the ac on and never gets warmer than the thermostat 195 degree

Rich 5150 69 07-15-2018 09:00 AM

Re: Champion radiator ?
 
1 Attachment(s)
3 row champion with factory shroud and fan. no issues

65 GMC 07-15-2018 03:56 PM

Re: Champion radiator ?
 
Quote:

Originally Posted by Rich 5150 69 (Post 8301506)
3 row champion with factory shroud and fan. no issues

Thanks for the input guys, that's exactly what I was looking for. I ordered the Champion 2 row with 1" rows, it showed up on Friday. After looking at it, I think everything is going to work out as I had hoped. I plan on running the short water pump on my 350 with a fan and clutch from a 66 Impala I parted out a while back.


All times are GMT -4. The time now is 01:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com