67-72 SBC motor mounts
I am looking for a set of 1967-1972 c10 motor mounts. They must be the ones that use the front or forward set of holes in the frame.
|
Re: 67-72 SBC motor mounts
for bb or sb? I believe they are all the same even for 6cyl......just flip sides....put driver on passenger and passenger on driver side.....i may be wrong but try it.....
|
Re: 67-72 SBC motor mounts
Quote:
|
Re: 67-72 SBC motor mounts
3 Attachment(s)
They might work flipping sides but they are definitely 2 different stands. V8 will bolt to the 250 I6 stands but it places the engine rearward but will work if you are not going for correct. I6 stand on the left, Small block on the right. A big block might bolt to the other stands but factory they used a different stand. Sand blasted pair in the second picture are 1968-71 Big block and the pair with the clam shells are 1972 big block stands and mounts.
|
Re: 67-72 SBC motor mounts
Quote:
|
Re: 67-72 SBC motor mounts
I have a set of BB mounts for a '72 but I'm sure the '72 mounts are specific for that year only. Came out of a 2WD. Not sure if there is a difference in 2WD VS 4WD though. They are the same style as the ones in the third picture posted by Todd68Chevy.
|
Re: 67-72 SBC motor mounts
Quote:
|
Re: 67-72 SBC motor mounts
Quote:
|
Re: 67-72 SBC motor mounts
Quote:
FWIW, I put a 454 into a '69 K10 and just used the stock SBC (4x4) mounts. Just moved them forward about an 1 1/4" or 1 1/2" to clear distributor if I remember right. Also, moving forward eliminates need to dent rear of valve covers for clearance, IIRC. |
Re: 67-72 SBC motor mounts
Did you ever find the engine mounts you were looking for?
If not I have a spare set of 67-71 small block frame mounts and a set of square body clamshell style frame mounts that I had in my 69 C20 before I converted it to 4wd. |
All times are GMT -4. The time now is 06:27 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com