Re: 81-87 bumper on 74?
To read the original thread and discussion on this topic go here- LINK
THERE IS NO NEED TO CUT FRAMES< NEVER!!!! Do I need to say that again? NEVER!!!!!!! To install a 81-91 bumper on a 73-80 frame, all you have to do is make one VERY SIMPLE (2 min hacksaw) cut on the 81-91 center bumper bracket and the bumper is a bolt on! Yes BOLT ON! All you have to do is cut the center bracket along the crease on a diagonal. On the end brace the center hole (in between the the 2 welded on nuts that are usually used) is the very same hole that the 73-80 end brace uses. I really don't how to explain this so I take a photo in the morning to show were the cut is made. But to say this a third time, THERE IS NO NEED TO CUT FRAMES< NEVER!!!! |
Re: 81-87 bumper on 74?
2 Attachment(s)
Quote:
All right here is the pictures... The first shows a stock bumper bracket, the second is where you need to make the cut (RED LINE). Throw the smaller piece away and bolt-on the larger piece to your truck. Then bolt the 81-91 bumper on. I have done a dozen or so and there is nothing else to do, nothing! PS... Sorry to those of you that have cut and wacked your frames, the conversion is just this simple. |
All times are GMT -4. The time now is 04:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com