The 1947 - Present Chevrolet & GMC Truck Message Board Network - Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Page 1 of 108

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)

- - Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy (https://67-72chevytrucks.com/vboard/showthread.php?t=554172)

67cheby

11-30-2012 10:56 AM

Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

5 Attachment(s)

Well here it is ! Estimated completion SEMA 2013 ! My wife decided she wanted her own vehicle that could haul the whole family and pull Cloud 9 to some long distance shows and of course showcase our product "Slosh TUbz Squared" ...so here we are project "SQUARE PEG" !!! It is a 1987 GMC JIMMY 4x4..soon to be a 2wd layed out on the ground ! LS powered, with a nice Retro theme probably go with the early round eye front end and a two tone paint with the early trim.....still deciding on colors ! So here is some pictures of it yesterday , i should have it at work today i will steam clean it top to bottom tonight , see if i can get the motor running so i can put that on craigslist (it is supposed to run great TBI 350) then start dissasembling all of the rest of the chassis ...more craigslist !

The first picture is me and my wife Sarah, i just thought i would show you who i am building this for . The rest are the beautiful original paint , zero rust 1987 Jimmy... project Square Peg !! This is going to be fun so stay tuned !

LODI3QTR

11-30-2012 11:10 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

I'll be watching.............http://i79.photobucket.com/albums/j1...ations/Eye.jpg

JNJchev77

11-30-2012 11:12 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Can't wait to see this one started Cheb!! Love the LS swap choice!!

raull

11-30-2012 11:15 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

sweeeet !!! here we go again !!!!!

lolife99

11-30-2012 11:21 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Member hot trux has a pair of 73-80 NOS GM front fenders, if you decide to go with the early front end.

Gus350

11-30-2012 11:22 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Looking Good..........:metal:

67cheby

11-30-2012 11:24 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Quote:

Originally Posted by LODI3QTR (Post 5731821)

I'll be watching.............http://i79.photobucket.com/albums/j1...ations/Eye.jpg

LOL....awesome !

Quote:

Originally Posted by JNJchev77 (Post 5731825)

Can't wait to see this one started Cheb!! Love the LS swap choice!!

thanks man, pretty pumped about the power of the LS myself...maybe a supercharger....we will see !

Quote:

Originally Posted by raull (Post 5731831)

sweeeet !!! here we go again !!!!!

hang on , its gonna be fun !

Quote:

Originally Posted by lolife99 (Post 5731843)

Member hot trux has a pair of 73-80 NOS GM front fenders, if you decide to go with the early front end.

can you pm his phone # i am interested !

69CST-V

11-30-2012 11:26 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

I'm in.

BMERDOC

11-30-2012 11:34 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Watching this one from the beginning!

LEEVON

11-30-2012 11:38 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Finally some excitement over here!

big_al_71

11-30-2012 11:41 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Mike I am looking forward to another great build..

Scottshotrods

11-30-2012 11:49 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Looks like a good start

Justin

Jonboy

11-30-2012 11:55 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

I've got a 2wd frame if you want one, too.

67cheby

11-30-2012 11:56 AM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Quote:

Originally Posted by 69CST-V (Post 5731858)

I'm in.

Thanks man !

Quote:

Originally Posted by BMERDOC (Post 5731868)

Watching this one from the beginning!

Thank you !

Quote:

Originally Posted by LEEVON (Post 5731873)

Finally some excitement over here!

LOL...i try !

Quote:

Originally Posted by big_al_71 (Post 5731878)

Mike I am looking forward to another great build..

Thanks man, i think you will like it !

Quote:

Originally Posted by Scottshotrods (Post 5731890)

Looks like a good start

Justin

Thanks Justin !

VA72C10

11-30-2012 12:03 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Looking forward to the build!
Posted via Mobile Device

jasonhall

11-30-2012 12:05 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

I'm in !!
Posted via Mobile Device

Zoomin

11-30-2012 12:12 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

In on page 1!

lolife99

11-30-2012 12:12 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Quote:

Originally Posted by 67cheby (Post 5731853)

can you pm his phone # i am interested !

PM sent.

gringoloco

11-30-2012 12:15 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

In! Early nose ftw :D
Posted via Mobile Device

67cheby

11-30-2012 12:23 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Quote:

Originally Posted by VA72C10 (Post 5731915)

Looking forward to the build!
Posted via Mobile Device

got any wheels ??? LOL, jk

Quote:

Originally Posted by jasonhall (Post 5731918)

I'm in !!
Posted via Mobile Device

thanks Jason

Quote:

Originally Posted by Zoomin (Post 5731931)

In on page 1!

Thanks Zoomin

Quote:

Originally Posted by lolife99 (Post 5731932)

PM sent.

Thanks Keith, i called him !

Quote:

Originally Posted by gringoloco (Post 5731934)

In! Early nose ftw :D
Posted via Mobile Device

LOL , i will try not to disappoint you all and i will try to make this not drag on forever !! LOL

nt30	11-30-2012 12:25 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Definitely subscribing to this one.
Posted via Mobile Device

Twisted78SS

11-30-2012 12:26 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Joining the fun!..

Great times ahead, I can sense it already.

trout

11-30-2012 12:28 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

nice start.. wish i could find a cheap body need those eblems for my jimmy

truckzilla

11-30-2012 12:31 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

Quote:

Originally Posted by BMERDOC (Post 5731868)

Watching this one from the beginning!

Likewise! Should be relatively decent since it seems he's gotten the learning curve pretty much over with Cloud 9!:lol:

Seriously, this is going to be the bad azz Blazer I've always wanted to do if I knew how to do the cool work that he does!

I wonder how high the posts will get with this build?

67cheby

11-30-2012 12:32 PM

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy

I am new to the Square body side, i am looking for all of the advice i can get ! So if you have any tips feel free to share ! I am planning on using the early front clip on this and my thoughts are to modify the early hood on the windshield side so i can still run the cowl panel , has anyone done this ?

All times are GMT -4. The time now is 07:44 PM.

Page 1 of 108

101

Last »

Show 40 post(s) from this thread on one page