straight 6 intake exhaust clamp?
Im missing an exhaust /intake bolt with this piece on it that holds intake and exhaust manifold to the head. cant find it anywhere. It came off a 1968 c10 4.1l 250
http://i1283.photobucket.com/albums/...psiaceiuxb.jpg |
Re: straight 6 intake exhaust clamp?
If you cannot find any, one can be made from a piece of 1/2" thick bar stock. Max torque on those is only 30 lb-ft. Have done it more than once.
|
Re: straight 6 intake exhaust clamp?
Quote:
|
Re: straight 6 intake exhaust clamp?
Does anyone know what it called?
|
Re: straight 6 intake exhaust clamp?
Do you have all the clamps except one long style? below are a couple of old threads about the clamps. I wouldn't bother replacing any of the missing bolts. NAPA should have studs that fit for a much easier installation. There should be two studs now in the 3rd hole, in from each end. Head rebuilders often remove them and don't replace.
http://67-72chevytrucks.com/vboard/s...d.php?t=374618 http://67-72chevytrucks.com/vboard/s...d.php?t=454785 |
Re: straight 6 intake exhaust clamp?
Quote:
|
Re: straight 6 intake exhaust clamp?
Thanks to all I'm fabbing some 1/2 inch. Figured I could test my skills :smoke:
|
Re: straight 6 intake exhaust clamp?
thanks for the help guys get her fixed up and sounding normal again !
|
Re: straight 6 intake exhaust clamp?
Maybe use an old chevy rocker arm flipped backward?
|
Re: straight 6 intake exhaust clamp?
1 Attachment(s)
Quote:
|
All times are GMT -4. The time now is 11:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com