WTB cowl screw u-nut
1 Attachment(s)
I need a nut like in the pic. I somehow misplaced one... It clips onto the cab under the cowl on the top and one of the 4 small screws threads into it.
|
Re: WTB cowl screw u-nut
I think the one in your picture is from the glovebox...I took some off the other day and they were not as long, almost square with tab on top covering only half of the screw hole.
|
Re: WTB cowl screw u-nut
napa, carquest, autozone, they all carry an assortment of screws and fastners, speed nuts, ect.
for almost any auto need like that. |
Re: WTB cowl screw u-nut
Quote:
|
Re: WTB cowl screw u-nut
Post a pic of what you have on the glovebo now.
I believe the dash bezel has ones like I described for the cowl panel but The cowl panel takes a larger screw, #10 vs dash screws which I think are #8. |
Re: WTB cowl screw u-nut
1 Attachment(s)
Here is what I took off when I removed the glovebox liber. It had been replaced at one time, it was kept original.
|
Re: WTB cowl screw u-nut
That’s what I took off he cowl the other day but like I said the dash bezel has something similar. I need to install a cowl tomorrow or so, I’m gonna remove one and see what it has for j clips and compare to the dash ones because the screw is larger I think. I will post up what I find.
|
Re: WTB cowl screw u-nut
Randy, thank you for sharing your knowledge.
|
Re: WTB cowl screw u-nut
Quote:
|
Re: WTB cowl screw u-nut
I have some spares of the j-nut that secures the middle of the cowl in my stash. Shoot over your address and I'll send you a couple :metal:
|
Re: WTB cowl screw u-nut
Curtb1971 I sent you a PM.
|
Re: WTB cowl screw u-nut
1 Attachment(s)
Dash above, cowl below
|
Re: WTB cowl screw u-nut
Randy thank you for posting that. It looks like I need three of those and possibly all four screws then.
|
All times are GMT -4. The time now is 08:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com