1967 Chevy CST aka "the loud truck"
 

well i am makin a new build thread that will continue the build of my 67 and later on in life the other cab will be a 67 GMC so this will be more organized with pics in order.

this will be a 67 chevy CST shortbed fleetside with the tailgate and taillight trim rear cab trim and lower trim.
the cabs information is, its a 1/2 ton, chevy, longbed, fleetside, V8, automatic 350, made in Fremont CA on the day January, 5th 1967, and its a 2wd, it came with lower trim, radio, power brakes, ammeter oil gauges, and A/C.


here are pics of it still at the PO's house. He said it was a complete running truck when he got it. he took the bed off and it bent so he trashed it. The front end he sold . He sold the frame as well so he just put it on a frame.

Re: 1967 Chevy CST aka "the loud truck"
 

more

Re: 1967 Chevy CST aka "the loud truck"
 

cool looking foward to it:metal:

Re: 1967 Chevy CST aka "the loud truck"
 

thanks for being the first nate! for that ill post some pics!
this was saturday while we were straping it at the guys house and the way home.

Re: 1967 Chevy CST aka "the loud truck"
 

more

Re: 1967 Chevy CST aka "the loud truck"
 

and more

PS nate that hold the camera outside the truck and take a pic of your truck pic was for you!

Re: 1967 Chevy CST aka "the loud truck"
 

heres more

Re: 1967 Chevy CST aka "the loud truck"
 

and even more but i think this is the last one.

Re: 1967 Chevy CST aka "the loud truck"
 

arent you glad i lied?

Re: 1967 Chevy CST aka "the loud truck"
 

Will keep following along! :chevy:

Re: 1967 Chevy CST aka "the loud truck"
 

thanks jonathan! i think i am doing well witht the organiztion and order of pics.

Re: 1967 Chevy CST aka "the loud truck"
 

heres was when it got to my house. i tore into it!

Re: 1967 Chevy CST aka "the loud truck"
 

then later that night after the cleaning i put stuff in it to make it look complete all it needed was the ignition but thats in the other 67 cab.

Re: 1967 Chevy CST aka "the loud truck"
 

then today i flipped her over for some cleaning...... looks like the previous previous owner didnt have his valve covers sealed well..... it leaked out of the back of the engine and on the firewall and on the bottom of the cab so it was thick greasy nasty dirty mess. but i cleaned it! still not done but tommorrow after school i will be :)

Re: 1967 Chevy CST aka "the loud truck"
 

and here is my undercoating. its rustoleum its rubberized, resists rust and its paintable. i like black so i think we are good. you can see what still needs to be sanded and cleaned. and were i did sand but didnt primer or paint yet.

Re: 1967 Chevy CST aka "the loud truck"
 

Re: 1967 Chevy CST aka "the loud truck"
 

as long as its done by page 100 so he can drive it again he will be all good :lol:

Re: 1967 Chevy CST aka "the loud truck"
 

oh quit it! :lol::lol:
well by or before november 18th the cab should be on the frame. i almost have the bottom all sanded and primed then undercoated. so as soon as its under coated and the firewall is painted then i can have the whole truck inside the garage.....

Re: 1967 Chevy CST aka "the loud truck"
 

well today i drilled the holes for the spotlight. and installed it. i also sanded the passenger kickpanel/floor area and the rest of that square where your feet go...... i am sorry but i dotn have pics :( i will get some tommorrow before i do anymore work.

Re: 1967 Chevy CST aka "the loud truck"
 

:sumo: :lol: ;)

Re: 1967 Chevy CST aka "the loud truck"
 

Re: 1967 Chevy CST aka "the loud truck"
 

thats cool, they can't say "worthless without pics on this thread" so far:lol:

Re: 1967 Chevy CST aka "the loud truck"
 

i'm watchin' this too. you're so organized now you should be done in a few more posts.

Re: 1967 Chevy CST aka "the loud truck"
 

thanks! im tryin. i really hope so!
i hope this can be said through the whole build thread!
soon lol especially after i post these new pics!
;)

and now for pics! i took pics of the spotlight install and the floor like i said. then it was on to the windows! the rubbers were pealing back and it didnt look good! :waah: so i cut the rubbers took the windows out (the rear window was factory green tint and i was going to keep it but.... it fell and shattered!!!!!:waah::waah::waah::eek::ack::dohh::banghead::thud:) then i brought out the wire wheel on the griinder got my saftey glasses and went to town! soon i found a clean window frame with 2 or 3 pin holes and some pitting the rest is all still nice. how'd you like this patina! im going to try my best to keep this top the original white, gonna have some fun still!

Re: 1967 Chevy CST aka "the loud truck"
 

more pics, also threw in some of the stupid holes for trailer wiring and another choke and somethin else???