1967 c-10 4x4 build
so, i bought this truck on the cheap with plans to have it looking like new, (or pretty d*mn nice at least) by junior year. i'm hoping this truck can be my senior project, but being a freshman, i need to talk that over with the school district. but i have plans for this truck, and i figured why not document it step by step, like you guys do on here? so i started out by making a video a week or so ago. here it is :
i have hopes on getting this truck as solid and shiney as a truck that rolled out of the factory yesterday. so tomorrow ill post the pictures of the stuff i did yesterday, because my image host is a PITA and i have school tomorrow(technically today). so thats a good start for now. hopefully i can get a trip to the junkyard sometime this week to get another c-10 emblem for the pass side, the chevrolet for the hood, and maybe a body panel or two depending on how they look. im going to try to make most of this build in video format, so it can be followed on youtube too. we'll see how it works out. |
Re: 1967 c-10 4x4 build
well any interior pics i have seen the exterior
|
Re: 1967 c-10 4x4 build
Not bad at all. Runs good and looks good. Be a great project once you get to workin on her. Good luck and take lots of pictures.:metal:
|
Re: 1967 c-10 4x4 build
Quote:
low&slow :thanks! like i said, i hope to record most of it on video, tyhen post the youtube links to each step. we'll see how it works out, but as of now, i have a ton of pictutres, and a couple videos! |
Re: 1967 c-10 4x4 build
Quote:
|
Re: 1967 c-10 4x4 build
Quote:
|
Re: 1967 c-10 4x4 build
http://i1093.photobucket.com/albums/.../Photo0094.jpg
http://i1093.photobucket.com/albums/.../Photo0095.jpg http://i1093.photobucket.com/albums/.../Photo0109.jpg that is the most recent thing that i did. the front emblem and rear drums are next..and i need to find the big jack for that. that will be the fun part...:ito: |
Re: 1967 c-10 4x4 build
http://i1093.photobucket.com/albums/.../Photo0112.jpg
theres the emblem set up there for picture purposes. it looks low, dosent it??? i thought it looked low, but i dont really mind. it gives it character;) http://i1093.photobucket.com/albums/.../Photo0110.jpg the only interrior shot i have as of now. i will try to get more soon! |
Re: 1967 c-10 4x4 build
they key hole for the ignition is it drilled bigger or something if not then i think you have a 68 cab and 67 doors
|
Re: 1967 c-10 4x4 build
Quote:
|
Re: 1967 c-10 4x4 build
wll then t is definatley a 68 cab the emblems look nice were the holes there when you got it or did you drill them and fill the original ones
|
Re: 1967 c-10 4x4 build
thats where the holes were when i got it.
|
Re: 1967 c-10 4x4 build
huh well the crome on the emblems look good for being take offs
|
Re: 1967 c-10 4x4 build
its been a while, but i got the oil pan gasket replaced, and its not leaking(yet!). while i was down there i painted the dust shield chevy orange, and i learned that the t-case and tranny were painted under all the oily mess. tomorrow i hope to replace the wheel cylinder, as one of them is bad.
|
Re: 1967 c-10 4x4 build
sweet do you have any pics
|
Re: 1967 c-10 4x4 build
i took some, but for some reason i can't find them. ill snap some more tomorrow.
|
Re: 1967 c-10 4x4 build
alright sounds good
|
Re: 1967 c-10 4x4 build
Nice truck! I can remember when I got my first 4x4. It was a 69 3/4 ton white, 350 4 speed, but mine was in worse shape. Enjoy the truck and the fixing up process!
|
Re: 1967 c-10 4x4 build
Alright great progress. That emblem does look really low that's weird. looking forward to pics.
|
Re: 1967 c-10 4x4 build
well the PO was hoping he could make the chevy eye level :lol:
|
Re: 1967 c-10 4x4 build
Quote:
|
Re: 1967 c-10 4x4 build
:lol: we only mean good jake if i have a 4wd i would definatly consider putting it there just to show it is a chevy and it is in your face!
|
Re: 1967 c-10 4x4 build
http://i1093.photobucket.com/albums/.../Photo0130.jpg
after it was taken apart-replacing the wheel cylinder. http://i1093.photobucket.com/albums/.../Photo0129.jpg i dont know if you can see that, but there is a crack in the boot, and the inside is rusted. http://i1093.photobucket.com/albums/.../Photo0131.jpg bondo cracks-i hope to get panels to get rid of the bondo. there is bondo in the bottom of Driver and passenger doors, and it also needs rockers. http://i1093.photobucket.com/albums/.../Photo0132.jpg i found the old pinkslip. i learned that it came all the way from Reading PA. and the start to my reciept collection :lol: |
Re: 1967 c-10 4x4 build
o nice pics you havent mounted the other bow tie emblem
|
Re: 1967 c-10 4x4 build
i havent mounted either! i dont know if im going to. i really like the look without trim or emblems. it looks clean. and i dont want to put them on until i do the body-the spot where the other one should be mounted is bondo'd thick and i do not like it one bit!
|
All times are GMT -4. The time now is 07:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com