Hooker LS Turbo Manifold
1 Attachment(s)
Started my 5.3 turbo setup in my 77 c10 and wanted to post that the Hooker Turbo manifold fits a c10. It is very close and need a small amount of grinding here and there. Just wanted to post this so if people search in the future they can find it. Before ordering I called Hooker direct to see if they knew if it fit. They had no idea. You have to unbolt the passenger side motor mount and jack the engine up a few inches to get it in.
The grinding was on the clam shell mount mount portion. All else clears. I suspect with different motor mounts it would all clear. |
Re: Hooker LS Turbo Manifold
Cool, thanks for the info. I suspect no low mount a/c compressor will fit?
|
Re: Hooker LS Turbo Manifold
low mount AC compressor would not fit.
|
Re: Hooker LS Turbo Manifold
Do you have any updated pictures of hot side routing or turbo placement?
|
Re: Hooker LS Turbo Manifold
3 Attachment(s)
Hope to start up in a week or so. Waiting on the driveshaft and crossover pipe. Hot side pipe is to big. Used 3" id pipe. Would use 2" or 2.5" if I did it again.
|
Re: Hooker LS Turbo Manifold
Too freakin cool. What’s your intercooler setup look like?
|
Re: Hooker LS Turbo Manifold
|
All times are GMT -4. The time now is 10:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com