The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Classifieds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=247)
-   -   GM Pulse Generator for electroc speedo (https://67-72chevytrucks.com/vboard/showthread.php?t=696559)

Hart_Rod 02-01-2016 10:27 AM
GM Pulse Generator for electroc speedo
 
1 Attachment(s)
This a new part. They list for $129 from DD, I will take $80 shipped. I had 2, and still have one left!

The missing piece of the increasingly popular early-GM transmission swap!
With late-model GM transmissions containing an internal speed sensor outputting 128,000 Pulses Per Mile, the stock 40-tooth (40 pulse per revolution) reluctor ring provided the factory ECM with a high frequency input. The SEN-01-128 can now recreate this missing high frequency rate when converting to an older style transmission with a mechanical speedometer output.

With a standard female 7/8” thread-on fitting, the SEN-01-128 fits all GM transmissions with a mechanical speedometer cable outlet. Removable weather-tight 10’ cable provides for simple installation and cable routing. 128,000 Pulse Per Mile Sine Wave signal output is direct replacement for the stock GM internal speed sensor, allowing the ECM receive the signals it needs for proper operation.

Fits GM transmission models with 7/8” Male Threading, ie: TH350, TH400, 700r4, 2004r, etc.

http://www.dakotadigital.com/index.c...rod/prd916.htm

Hart_Rod 02-29-2016 09:03 AM
Re: GM Pulse Generator for electroc speedo
 
bump

chevy-fun 03-03-2016 08:01 PM
Re: GM Pulse Generator for electroc speedo
 
1 Attachment(s)
im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire

Hart_Rod 03-03-2016 08:46 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7508475)
im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire

Here are the directions to the sensor:

http://www.dakotadigital.com/PDF/SEN-01-128.PDF

Looks like you have a 12V power, GRND and the sensor output. Which matches up to #3. Let me know.

Rob

Hart_Rod 03-04-2016 12:35 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7508475)
im interested but have some ?s. i have a 5.3/700r4 with VDO Vision Series Speedometers 437155. not connected, an using my phone gps. is this what i need. an which way would i hook it up

1-Pin Number
1. Not used
2. Red wire from Hall Effect sender
3. Ground and black wire from Hall Effect sender
4. 12V Switched
5. Not used
6. White wire (split) from Hall Effect sender
7. Not used
8. White wire (split) from Hall Effect sender

2-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Sender wire
8. Sender wire

3-Pin Number
1. Not used
2. Not used
3. Ground
4. 12V Switched
5. Not used
6. Not used
7. Not used
8. Sender wire
Do you want it?

chevy-fun 03-04-2016 09:33 PM
Re: GM Pulse Generator for electroc speedo
 
Yes. But strap on cash right now. Don't get paid till Wednesday. I'll check back then to see if it hasnt sold

Hart_Rod 03-04-2016 11:03 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7509812)
Yes. But strap on cash right now. Don't get paid till Wednesday. I'll check back then to see if it hasnt sold
No worries . I hqve two of them, :D

Aruba1 03-06-2016 01:07 AM
Re: GM Pulse Generator for electroc speedo
 
Will it work on the 5.3L with NV4500?

Hart_Rod 03-06-2016 09:06 AM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by Aruba1 (Post 7511242)
Will it work on the 5.3L with NV4500?
I dont see why not.

Hart_Rod 03-08-2016 12:04 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by Aruba1 (Post 7511242)
Will it work on the 5.3L with NV4500?
Are you still interested?

chevy-fun 03-08-2016 09:02 PM
Re: GM Pulse Generator for electroc speedo
 
Hi HART ROD. if you can send me your paypal or how to pay. I can send the $ around 3-4am, an when would you be able to ship. hoping to try to have before the wkend when i go out town for a show. thanx you in advance

Hart_Rod 03-08-2016 09:09 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7515010)
Hi HART ROD. if you can send me your paypal or how to pay. I can send the $ around 3-4am, an when would you be able to ship. hoping to try to have before the wkend when i go out town for a show. thanx you in advance
Paypal is robhartley@aol.com. It would have to be overnighted fornyou to get it by this weekend.

chevy-fun 03-08-2016 09:31 PM
Re: GM Pulse Generator for electroc speedo
 
its k just ship it regular. doubt i would have time to actually get it put on in time cuz of work. ill send the $ in morning. thanx again

Hart_Rod 03-08-2016 10:06 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7515057)
its k just ship it regular. doubt i would have time to actually get it put on in time cuz of work. ill send the $ in morning. thanx again
Sounds good!

chevy-fun 03-09-2016 07:39 AM
Re: GM Pulse Generator for electroc speedo
 
payment sent

Hart_Rod 03-09-2016 08:31 AM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7515491)
payment sent
Will be in the mail today. Thanks!

Hart_Rod 03-11-2016 09:17 AM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7515491)
payment sent
Shipped, thanks again!

Quote:
Originally Posted by Aruba1 (Post 7511242)
Will it work on the 5.3L with NV4500?
I still have one left, let me know :D.

chevy-fun 03-12-2016 07:45 PM
Re: GM Pulse Generator for electroc speedo
 
Received the part. Thanx again Hart Rod

Hart_Rod 03-13-2016 10:20 AM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7519998)
Received the part. Thanx again Hart Rod
Your welcome! :metal::metal:

I have one more left! :D

Hart_Rod 03-19-2016 09:06 AM
Re: GM Pulse Generator for electroc speedo
 
Bump

chevy-fun 04-03-2016 09:17 PM
Re: GM Pulse Generator for electroc speedo
 
2 Attachment(s)
thanx again HART ROD. finally got around to installing last wk. gauge is finally working.

Hart_Rod 04-05-2016 12:26 PM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by chevy-fun (Post 7546905)
thanx again HART ROD. finally got around to installing last wk. gauge is finally working.
Sweet! :metal: I've got one more for sale if anybody else needs one.

Hart_Rod 04-30-2016 08:34 AM
Re: GM Pulse Generator for electroc speedo
 
bttt

elf w/capital T 06-04-2016 11:58 PM
Re: GM Pulse Generator for electroc speedo
 
If it only fit and worked on an nv3500. Ugh good luck!

Hart_Rod 06-05-2016 12:42 AM
Re: GM Pulse Generator for electroc speedo
 
Quote:
Originally Posted by elf w/capital T (Post 7615229)
If it only fit and worked on an nv3500. Ugh good luck!
Why wouldn't it? Isn't that where your speedometer cable mounts now?


All times are GMT -4. The time now is 05:57 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com