how to remove
 

Not sure if this is the best spot to post but figured I would give it a shot.
I have a GM spot light that I want to take off of a parts truck i have and want to do it without breaking it. Instead of just going in blind on it, I was wondering if any of you guys have pointers or even an exploded view picture of them.

TIA
Richard

.

Re: how to remove
 

I have never taken one apart but I guess you need to remove the handle inside or the light assembly on the outside so the arm slides through the pillar. Looks like the light assy has a clamp on the outside to do just that.
Make sure to use penetrating oil for a few days to loosen that 50 year old rust!
I'm sure it should not be too complicated...Man made, man can take it apart!

Bill

Re: how to remove
 

This thread might help

http://67-72chevytrucks.com/vboard/s...d.php?t=401449

Re: how to remove
 

Thanks for the link I bookmarked it for future reference as well.

Re: how to remove
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: how to remove
 

Disconnect wiring.
Remove pistol grip.
Slide shaft out [forward].
Save bracket [p/n 202 -- for 67-72 GM trucks].
www.unityusa.com

Re: how to remove
 

Thanks for the help guys. I got it removed from the truck without any damage. I just wanted to get it put away before I did hit it with something.