The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   cab corners question (https://67-72chevytrucks.com/vboard/showthread.php?t=733421)

BCOWANWHEELS 03-22-2017 03:05 AM

cab corners question
 
to do cab corners correctly the bed needs to come off right..........

GR8-68 03-22-2017 05:05 AM

Re: cab corners question
 
That would be correct. How much do you need to cut out ?

BCOWANWHEELS 03-22-2017 10:34 AM

Re: cab corners question
 
the worst side 6 inches up

67ChevyRedneck 03-22-2017 11:04 AM

Re: cab corners question
 
Fleetside yes to be easiest, but if you remove the back tires and put the truck on jack stands you could just slide the bed back. Depending on damage, you could get away with just removing the steps and step braces on a stepside bed.


All times are GMT -4. The time now is 04:05 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com