The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - 86 c10 lowering question (https://67-72chevytrucks.com/vboard/showthread.php?t=573500)

hogcruzen

03-31-2013 09:37 PM

86 c10 lowering question

i want to lower my truck with a 2/4 kit but do not know which one . any ideas? also ,, it looks like the shackles would hit the bed brace . am i looking at this wrong . how easy is this to do ? i need a kit with good instructions lol. thanks in advance guys.

G8DAN

04-01-2013 02:13 PM

Re: 86 c10 lowering question

If you want to do 4 in the rear the shackles and hanger kit will be your best bet... The shackles are easy to install but you have to notch the bed brace. The hangers are the biggest pain in the arse though. You need to get the factory rivets off. I went with this approach and I am satisfied with it.

1986swb

04-26-2013 03:39 AM

Re: 86 c10 lowering question

Quote:

Originally Posted by G8DAN (Post 5984874)

Ditto. Check out my pics for details on my 1986 GMC Sierra Classic: 2.5" drop front spindles and 4" drop rear hangers and shackles.

http://67-72chevytrucks.com/vboard/a...mid=977&page=2

All times are GMT -4. The time now is 05:16 AM.