Vortec Head Valve Seals Help/Recomendation
Just picked up a set of heads on the cheap, $50 for the set.
Need to replace the valve seals, but the local auto parts stores dont have what i seem to need. My valve guide boss is measuring .550-.560 (battery is dead) The felpro listed for Vortec Equiped heads were way to big, inner diameter of .580, seems like they would have popped right off. Any recommendations? Thanks |
Re: Vortec Head Valve Seals Help/Recomendation
Just a FYI Vortec Heads are very prone to crack , I would have them checked to see if they are any good before started spending money ...
|
Re: Vortec Head Valve Seals Help/Recomendation
There were two valve stem sizes offered. HD truck engines had larger stems.
|
Re: Vortec Head Valve Seals Help/Recomendation
Quote:
|
Re: Vortec Head Valve Seals Help/Recomendation
NDT testing, a machine shop can do it. $50 for the set tells me they are cracked, hopefully not.
|
All times are GMT -4. The time now is 12:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com