67 (Crew Cab) C30
 

Here is my Build thread.
The first Picture is of my Grandpa's truck.
I loved riding in that truck.
These are some of the reasons why
I decided to build this Truck.
My Daddy also bought a 67 long bed
that I drove when I was 10 or 11 years old.

I will add to this part of the Story in the future.
So I'm building a 1 Ton Chevrolet
Crew Cab with small back window
with Suburban doors.

Attachment 1840198

Attachment 1840199

Re: 67 (Crew Cab) C30
 

I got my sheet-metal this past weekend
from Huey's in Jamestown,TN.

Attachment 1840242

More pics. soon.

Re: 67 (Crew Cab) C30
 

Re: 67 (Crew Cab) C30
 

I have lots of pictures.
I will post.
Right now I have the cab removed
And getting ready to weld in the floor.

Re: 67 (Crew Cab) C30
 

I got Inner and outer rockers ,foot-wells and cab corners also.
Attachment 1840577
Here is a Pic of the Vision :lol:
Attachment 1840581
This truck (was) for the most part original.
It still has crayon marks on fenders and hood.
Attachment 1840582
I found radio delete plate in glove-box.
Attachment 1840584

Re: 67 (Crew Cab) C30
 

Here is Pics of taking the cab off the frame.
Attachment 1840589
Attachment 1840590
And then I took it to a Guy
close to work that does
Sand blasting/Power coating

Attachment 1840592
Attachment 1840595

Re: 67 (Crew Cab) C30
 

Looks like a good start, what are you doing for the engine?

Re: 67 (Crew Cab) C30
 

My Engine of choice currently is a SBC 350 crate engine.

Re: 67 (Crew Cab) C30
 

Cool project but I think The RocknRod was trying to point you to the 67-72 area since your posting in the 60-66 one at moment.

Re: 67 (Crew Cab) C30
 

Thanks
I noticed that after my 2nd post of some pics.
Maybe one of the moderators will move it for me.

Re: 67 (Crew Cab) C30
 

I'm working on the cab today.
I got a good helper.

Attachment 1841940

Re: 67 (Crew Cab) C30
 

Looking good man. I loved my 70 c30 dump truck. I sold it to my buddy so I get to drive it every once and I while.

It looks like you got a pile of work ahead of you. What are the plans of making it a quad cab. Find another cab or suburban to carve up. There's a couple suburbans were I'm at for fairly cheap they would of worked great for your project.

Re: 67 (Crew Cab) C30
 

Looks like a solid start! Keep up the good work. :metal:

Re: 67 (Crew Cab) C30
 

Thanks.

Re: 67 (Crew Cab) C30
 

I got Suburban doors a b-pillars from Richard2717
I will replace the whole front floor pan .
Then cut the cab and add rear floor
and use sheetmetal from another cab for the roof.
I may have a Suburban showing up at Christmas ��

Re: 67 (Crew Cab) C30
 

Hey Getter-Done, Cool project. looking forward to more photos of your progress. Would it be easier or even possible to cut a suburban body rather than extend a pickup cab? I have never attempted a project like yours so I am just wondering if that is an option.

Re: 67 (Crew Cab) C30
 

Thanks 62bagger
Yes it can be done either way.
Several guys on here Have Great build threads
that have done the 2 cab option and also the suburban body.
Randy and Trevor was the two builds that
was my deciding factor for me to go with a crew cab
instead of my original plan of a flatbed truck.
I have also been studying a few other members that have built
the crew-cab also.
I will make my decision if I drag that Suburban home
after Christmas.

Re: 67 (Crew Cab) C30
 

Subscribe, because I need answer. Lol. I'm having a hard time getting exact information about the frame .

Re: 67 (Crew Cab) C30
 

that's ahelluva flatbed! im subbing for sure. id like to see a4 door 67 small window cab.

Re: 67 (Crew Cab) C30
 

Which frame are you referring too?
My frame is the 157".

Re: 67 (Crew Cab) C30
 

Thanks Michael
I know my plans will change along the way.
Both cabs I have are small window.
So my plan is Crew Cab with Suburban doors,
cab lights and small back window.
The rear door will have the same radius (curve)
at the top of the door as the truck door.
A fleet-side bed with Step-side fenders attached
because I plan to keep the dual wheel rear axle.

Re: 67 (Crew Cab) C30
 

I have been taking pictures for awhile.
So I will post those to get up to my
current point of the build as I go.
Here is the pics. of the donor bed
for my Dually fenders.
Attachment 1842811

Attachment 1842824

Attachment 1842828

Attachment 1842830

Re: 67 (Crew Cab) C30
 

Here is a picture of the 1st mock up
of one of the fenders.
Attachment 1842832

Re: 67 (Crew Cab) C30
 

Here is 2nd Mock up
Attachment 1842833

Re: 67 (Crew Cab) C30
 

I don't think I explained in my build how I made the driver side B pillar from a donor passenger one which I think I bought from Richard too.
Its super easy and is almost identical to the passenger side after cutting and rewelding. Do you remember if I posted about it?
Basically I cut the pillar in about 5 sections and flipped them over and to the left then rewelded them together, the 5 sections are all straight when cut and then when flipped they make a mirror image.
Inside the B pillar is a hing reinforcing plate, I did the same with it but cut it in 3 section I think.
The hinges I just flipped over and drilled one new hole on the door side to match my million piece door.

If I didn't post about it, I can do it and number the sections with pictures.
The upper half (door frame section) of the B pillar I just used as is, the seam is in the front vs the rear on the other side.

Just ask if you have any questions about what I did or what I might have done differently.

Sounds like you have a great plan and a good start.