The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - xj steering shaft swap (https://67-72chevytrucks.com/vboard/showthread.php?t=773593)

blackhawck

10-19-2018 03:12 PM

xj steering shaft swap

Will the 87-95 jeep xj steering shafts swap to a 71 k10? What is the spline count/diameter, I'm showing a 13/16th 31 spine at my steering gear. Has anyone done this to a k10, is there a difference. Thanks in advance for any help before I head to the pick and pull.

70shortfleet

10-20-2018 10:00 AM

Re: xj steering shaft swap

It will not work. The diameter is about 23/32'' and the spline count is 36

leddzepp

10-21-2018 12:03 AM

Re: xj steering shaft swap

The splined end will fit our steering boxes...I have one and have test fit it. The problem is that the other end of the XJ shaft is a DD, and the steering columns on our trucks are splined, so it will not connect without an adapter of some sort.

All times are GMT -4. The time now is 06:24 PM.