The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - My 1959 Apache Build (https://67-72chevytrucks.com/vboard/showthread.php?t=745062)

jeremywrags

08-21-2017 09:49 AM

My 1959 Apache Build

Hi All,

I am super excited to start my 59 Apache build. I am not even sure what I am going to do with it yet but it's going to be a slow process.

I will pick it up this weekend and get some better pictures, here is what I have so far.

https://preview.ibb.co/fg1tz5/IMG_1621.jpg
https://preview.ibb.co/iWxBmk/IMG_1620.jpg

https://preview.ibb.co/jayvCQ/IMG_1622.jpg
https://preview.ibb.co/ke0Wmk/IMG_1624.jpg
https://preview.ibb.co/bvAxRk/IMG_1623.jpg
https://preview.ibb.co/nBA8XQ/IMG_1625.jpg

jeremywrags

08-21-2017 10:10 AM

Re: My 1959 Apache Build

I am very new to these old trucks so any advice you all can give would be greatly appreciated.

My plan is to drop it down a bit, add a bit of rake and make it handle & stop like a new ride. the whole process I expect to take a few years, with limited time and budget i cannot build it quickly. I want to go slow and do it right. Probably going to start by stripping, cleaning & painting the frame, then build out the rolling chassis before starting on the body & interior.

I do have a fairly well equipped shop (Lift, Welder, air tools...) and some fab skills which I will hone over the course of this project.

Advice I am looking for initially

1. Chassis, looking at IFS options, weld on, bolt on, what do you guys think?
2. Rear end options. What donor should I be looking for?
3. 4Link or flip axle over springs?

Daze57

08-21-2017 12:08 PM

Re: My 1959 Apache Build

you have a good starting project --lots of good ppl here and info .
ask all your questions may take a day for a response but you will get some .
i;d say figure out your budget and kind of get an idea of what look you want ;
there is plenty of help hear ........good luck and keep us posted

jeremywrags

08-21-2017 12:19 PM

Re: My 1959 Apache Build

Quote:

Originally Posted by Daze57 (Post 8021802)

Thanks Daze, it is a good starter, almost all of the rust repair has been completed by the PO. As for budget, well I want to do things right so I plan to save for each step of the way, it may take me a few years to complete because of this strategy but I want a killer ride at the end :-)

I was on this form a few years ago with a 72 Jimmy that I had, tons of good folks, looking forward to keeping you all updated.

Indian113

08-21-2017 02:37 PM

Re: My 1959 Apache Build

Nice looking 4 eyes! Google is your best friend because YOU can read the posts and make up your own mind. You will get so many Opinions about a IFS that you'll go around in Circles. Everybody has reasons why they are Right and in Reality they do have some good points. Good luck and I'll keep a eye on your progress

jeremywrags

09-01-2017 09:36 PM

Re: My 1959 Apache Build

my56chevytruck

09-01-2017 09:55 PM

Re: My 1959 Apache Build

my .02 worth is start off with the frame, box it as well, move to the suspension. 2nd Camaro is a good choice, unless you've got the extra money laying around for the TCI stuff and independent suspension. Yes, weld and bolt wherever you can, the stronger you can make something, the better all the way around. 4 link is a great choice, but that depends upon your income. I went with a 2nd Camaro for front and rear and 4 leafs per side. it all depends upon your income and desires. good luck.

pugs	09-04-2017 10:25 PM

Re: My 1959 Apache Build

get the truck running again slap the fender back make sure the lights and brakes are good and drive till ya save up the money for all the parts then blow it apart and have at it

Softpatch

09-04-2017 10:56 PM

Re: My 1959 Apache Build

I like it and will subscribe to this thread ....
Hopefully I can be inspired about your family and your truck
I've had some set back in my build and need some motivation
motor on I'm in.... Sp
.

jeremywrags

09-09-2017 10:42 PM

Re: My 1959 Apache Build

All times are GMT -4. The time now is 04:57 AM.