Re: 72 blazer 4-spd CST part out
 

How's the left fender?

Re: 72 blazer 4-spd CST part out
 

I'll get a picture but it has some rust.

Re: 72 blazer 4-spd CST part out
 

Sorry for the delay but I'll have to pass on skip plate and the spare tire Carrier

Re: 72 blazer 4-spd CST part out
 

Alright thank you I just need some blue dial hubs to put on a Suburban I don't have to be super still interested on and them and the antenna pending outcome of your research

Re: 72 blazer 4-spd CST part out
 

No problem thanks for letting me know.

Re: 72 blazer 4-spd CST part out
 

Any luck on the door pieces?

Re: 72 blazer 4-spd CST part out
 

Dwayne, still waiting for a few pics of the tcase skid plate. Was blazer equipped with NP205 case and is skid plate interchangeable for 4spd and an auto set-up?

Re: 72 blazer 4-spd CST part out
 

I'll have to pass on the skid plate and tire carrier. thanks

Re: 72 blazer 4-spd CST part out
 

Here you go 58 shipped if still interested.

Re: 72 blazer 4-spd CST part out
 

Yes, 205 case should work on auto or 4 spd

Re: 72 blazer 4-spd CST part out
 

Here is what the fender looks like

Re: 72 blazer 4-spd CST part out
 

Any pictures of the seats, I read through the three pages and I don't think anybody's said I'll take them yet. I might have missed it. First in line if they look good. Might be able to pick up in Carlisle. Hold downs and bolts included?

Re: 72 blazer 4-spd CST part out
 

Dwayne,

That fender looks pretty rough...how is it around the headlight? I'm trying to repair the eyebrow on my 67 fender. The most prominent ridge of the 69-72 fenders looks like the same contour as the 67 eyebrow (see 1st photo). How much would you want just for the portion of the fender ahead of the front of the turn signal and above the bottom of the turn signal (see 2nd photo)?

Rob

Re: 72 blazer 4-spd CST part out
 

How's 10 plus shipping

Re: 72 blazer 4-spd CST part out
 

I'll grab some pictures this weekend the rear seat isn't out yet.

Re: 72 blazer 4-spd CST part out
 

Sounds good if that portion of the fender is solid and shipping to 22191 is reasonable. Let me know.

Re: 72 blazer 4-spd CST part out
 

Ok thanks

Re: 72 blazer 4-spd CST part out
 

Antenna was junk looks like someone pulled the end off. I may have another, give me a couple days to look for it.

Re: 72 blazer 4-spd CST part out
 

Hey Dwayne. I’m interested in the skid plate and crossmember... I’d be willing to meet up at carlisle spring swap meet in April I believe.. I’ll be going Friday. Could you post pics of crossmember if possible.. assuming that’s the same as a regular crossmember..
Posted via Mobile Device

Re: 72 blazer 4-spd CST part out
 

Correct same as a regular crossmember without the upper supports and has the holes drilled for the skid plate. The crossmember was beat up pretty good but I have a regular one if that works for you. If so I'll get you some pictures a day next week.

Re: 72 blazer 4-spd CST part out
 

I have a crossmember is its regular one... I’ll just take the skid plate I’d thats ok... as long as its not all bent up... looks to be in good shape. Thanks
Posted via Mobile Device

Re: 72 blazer 4-spd CST part out
 

Yes, that will work see you at Carlisle.

Awesome.. I’ll keep in touch and see ya then. Looking foreward to meeting another local member..
Posted via Mobile Device

Re: 72 blazer 4-spd CST part out
 

If the door pieces for $58 haven’t been sold I’ll take them.

Re: 72 blazer 4-spd CST part out
 

Bmfm64 hasn't been on since I post pictures and a price let me give him a day or so to check them out.