Re: 72 blazer 4-spd CST part out
 

PS floor brace is junk.

Re: 72 blazer 4-spd CST part out
 

Blazer has to set outside for 2 weeks maybe long so I'm letting the top on until I push it back in.

Re: 72 blazer 4-spd CST part out
 

Here is everything you need but the hatch handle. The clips that hold the rods to the handle mechanism are not correct they should have a straight ear. They are always rusted to pieces, I will send 2 of each with opposite 90 degree ears, one or the other should work. The bottom handle cover has some pitting and areas that are gone. Please look at pictures carefully and if you need more just ask.

Re: 72 blazer 4-spd CST part out
 

Here are the handles I was talking about 250 if interested.

Re: 72 blazer 4-spd CST part out
 

I need the two brackets that are on the left and right side of the topper they are bolted to the hold down bracket for topper and the latches engage into them to keep it locked I also need passenger arm that holds up the topper

Re: 72 blazer 4-spd CST part out
 

I sure would like a handle will you take 500 for everything including handle

Re: 72 blazer 4-spd CST part out
 

Let me know what you think. if you don't have the passengers arm that holds up the hatch that's cool but I do want the handle and latch receivers thanks you alot:metal:

Re: 72 blazer 4-spd CST part out
 

I will be waiting for pm to send payment thanks

Re: 72 blazer 4-spd CST part out
 

Let me think about it, I'll let you know tomorrow.

Re: 72 blazer 4-spd CST part out
 

Ok sounds great thanks

Re: 72 blazer 4-spd CST part out
 

Sorry, I going to have to pass. The problem is I was keeping the parts for myself to rebuild the hatches I have. If I ever get to the point of rebuilding the hatches and need the parts I will have to replace them.

Re: 72 blazer 4-spd CST part out
 

So your not looking to sell anything

Re: 72 blazer 4-spd CST part out
 

I'll sell it am just not taking a lost to sell anything.

Re: 72 blazer 4-spd CST part out
 

Ok can I get the parts for the hatch minus the handle and I will get a handle in tha next week or so after I get some more jingle

Re: 72 blazer 4-spd CST part out
 

Ok, I'll pm my pp info.

Re: 72 blazer 4-spd CST part out
 

Ok sounds good I will be waiting :metal:

Re: 72 blazer 4-spd CST part out
 

You should have it let me know if you didn't receive it.

Re: 72 blazer 4-spd CST part out
 

Payment sent thank you so much I will be in touch for the handle:metal:

Re: 72 blazer 4-spd CST part out
 

Received, should ship out today.

Re: 72 blazer 4-spd CST part out
 

Works for me, I'm not in a rush. PM me if you remember and I'll try to remember to check back here in a couple weeks. Still working on house repairs / upgrades after Hurricane Michael so it crazy town still over my way

Re: 72 blazer 4-spd CST part out
 

I'll pass on the roof rack thanks.

Re: 72 blazer 4-spd CST part out
 

Thanks for the rear hatch parts they fit like a glove just installed them last night :lol:

Re: 72 blazer 4-spd CST part out
 

I was also looking for a passenger side hatch strut it's the arm that holds up the hatch thanks

Re: 72 blazer 4-spd CST part out
 

Sorry, no hatch struts at this time.

Re: 72 blazer 4-spd CST part out
 

Finally removed the top looks decent but it does have a rust spot by the third top hold down hole.