The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Where's the 3/4 ton love? (https://67-72chevytrucks.com/vboard/showthread.php?t=430724)

oem4me 11-23-2010 02:59 AM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by justcuz (Post 4308679)
So you have a saginaw 3 spd with overdrive now and 4.10 gears? Did you swap out the rear end or just the drop out in the Eaton. I like the 60 through 62's because they had the torsion bar front ends, the ball joints on those front ends are beefy. The broken back syndrome you refer to, was that caused by the 3/4 ton rear cab mounts? I know the 3/4 tons had a different mount that was not as durable as the 1/2 ton rear cab mounts.

The trans with O.D. came from a '57 passenger car, and I only swapped the gears in the rear end.
As for the cab mounts, to be honest, I'm not familiar with the differences between them, I've just noticed a heck of a lot of these trucks look as though they have a bad back. But you're right, it's probably bad mounts.

jonzcustomshop 11-23-2010 12:07 PM

Re: Where's the 3/4 ton love?
 
1 Attachment(s)
here is a pic of the vulcanized 3/4 ton mount:

DWitcher 11-24-2010 12:22 AM

Re: Where's the 3/4 ton love?
 
Cab mount?

jonzcustomshop 11-24-2010 01:45 AM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by DWitcher (Post 4310931)
Cab mount?

yeah that is the rear cab mount for the 3/4 ton and bigger trucks.

raycow 11-24-2010 08:00 AM

Re: Where's the 3/4 ton love?
 
Is that what you mean by the "broken back" look - the rear of the cab drops down so it no longer lines up with the box?

Ray

oem4me 11-24-2010 10:50 AM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by raycow (Post 4311196)
Is that what you mean by the "broken back" look - the rear of the cab drops down so it no longer lines up with the box?

Ray

Yep. It produces a slightly V'ed effect in the body lines from cab to box and gives the appearance of a broken back.

jimmydean 11-24-2010 02:04 PM

Re: Where's the 3/4 ton love?
 
I can't wait to ditch those mounts.

DWitcher 11-24-2010 04:18 PM

Re: Where's the 3/4 ton love?
 
No doubt. I'll have to look under mine. Those have got to go.

rideblue00 11-24-2010 09:47 PM

Re: Where's the 3/4 ton love?
 
Yep the 3/4t mounts just dont last. I have to replace mine as well. Just the rears only tho. You have to get used 1/2t ones. Or there used to be a guy on here that had a bunch made and i got a pair from him. Cant remember his name or email. I will look it up and see if i can find him. His were really good quality. They looked almost exactly the same.

jonzcustomshop 11-24-2010 10:35 PM

Re: Where's the 3/4 ton love?
 
If you can find a contact for lilred66 he is still reproducing them, I heard just the other day from another board member that he got a set a few weeks ago, and they were real nice.

nbrfd007 11-25-2010 11:49 AM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by jonzcustomshop (Post 4312529)
If you can find a contact for lilred66 he is still reproducing them, I heard just the other day from another board member that he got a set a few weeks ago, and they were real nice.

You can catch Tony in the Stovebolt Parts Forum.

Chevy Fleetside 11-25-2010 11:53 AM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by nbrfd007 (Post 4313318)
You can catch Tony in the Stovebolt Parts Forum.

He is also at www.chevytalk.com

LostMy65 12-31-2010 02:33 AM

Re: Where's the 3/4 ton love?
 
I didn't want to bumb this thread without adding a pic
http://www.purplewaveauction.com/i/a...rplus/2985.JPG

sdwolff98 01-01-2011 11:46 PM

Re: Where's the 3/4 ton love?
 
Love my 3/4 ton jimmie :D she been a good ole truck and fixing to get even better with 403 vvt hp and 6 speeds to run her down the highway. And last but not least the drag any rice burner sassy enough to challenge him down highway 75 in dallas with a chain >:)


Sean

LostMy65 02-13-2011 12:13 AM

Re: Where's the 3/4 ton love?
 
http://www.gtaplanet.de/images/dlpic...Towtruck_1.jpg

Grandpa's 66 Chevy 02-13-2011 05:37 AM

Re: Where's the 3/4 ton love?
 
4 Attachment(s)
3/4 ton is the only way to roll. This truck is all stock except for dual exhaust and 15" wheels. Got the split rims in the shed. 283 4sp 4.56rear (need sumpin pulled)

chevyrestoguy 02-13-2011 10:59 AM

Re: Where's the 3/4 ton love?
 
Here's my '64 I just bought yesterday. No engine, manual trans. The body has seen some tough times, but the main reason why I jumped all over it was the fact that it has factory A/C. I have never seen in-dash air on a '64, because I thought that the option first came out in '65. Anyway, it's got the tinted windows, but the evaporator housing is missing from the firewall. Funny, I have seen those pieces intact on parts trucks, but it's always the dash pieces that are missing. This one was backwards. I bought it off of Craigslist from a guy who was getting evicted and had to get rid of it. I bought it for $200. The Chevy truck Gods were shining down on me yesterday.

I plan on getting it back together, stock-looking, and making a cool parts chaser out of it.

http://i222.photobucket.com/albums/d...vyTruck004.jpg

http://i222.photobucket.com/albums/d...vyTruck002.jpg

oem4me 02-13-2011 11:29 AM

Re: Where's the 3/4 ton love?
 
SCORE! that's cheap even for a parts truck! ...ditto on the A/C in '64 ..??

LostMy65 02-16-2011 04:11 AM

Re: Where's the 3/4 ton love?
 
http://www.grumpyzgarage.com/photoga...0%20CREW-1.jpg

pope 02-17-2011 01:54 PM

Re: Where's the 3/4 ton love?
 
thought I would add my 3/4 4WD to the list...
http://img530.imageshack.us/img530/6583/1000803e.th.jpg
http://img248.imageshack.us/img248/4681/1000404x.th.jpg
http://img4.imageshack.us/img4/9168/0405102111.th.jpg

mikie 1954 02-17-2011 02:23 PM

Re: Where's the 3/4 ton love?
 
You can have your cab mounts redone by STEEL RUBBER PRODUCTS if you want to stay stock.

SFTorange 02-17-2011 02:23 PM

Re: Where's the 3/4 ton love?
 
1 Attachment(s)
Here's my C-20!

It may be being changed to a six-lug setup, but it's still a 3/4 ton at heart.

jimmydean 02-17-2011 03:11 PM

Re: Where's the 3/4 ton love?
 
Quote:

Originally Posted by jonzcustomshop (Post 4312529)
If you can find a contact for lilred66 he is still reproducing them, I heard just the other day from another board member that he got a set a few weeks ago, and they were real nice.

I thought you could use the LMC/Goodmark 1/2 ton mounts? There is a write up around here somewhere...

Surfdaddy 02-17-2011 06:07 PM

Re: Where's the 3/4 ton love?
 
1 Attachment(s)
Mine is a mess right now but should be on the road very soon. Starting from the wheels up.

68lngbed350 04-16-2011 12:59 AM

Re: Where's the 3/4 ton love?
 
2 Attachment(s)
my 68 3/4 ton, not a 60-66 but I love my 3/4 ton


All times are GMT -4. The time now is 06:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com