The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   64 C20 ignition swap withOUT key, is it possible? (https://67-72chevytrucks.com/vboard/showthread.php?t=744303)

CousinTone 08-10-2017 01:09 PM

64 C20 ignition swap withOUT key, is it possible?
 
Hey all, it's time to get the interior of my 64 refurbished. I've lost the keys in the two years it's been sitting. How am I going to remove the ignition switch and replace it with the new set I got at the Truck Shop here in Orange. Can anyone provide some guidance? Thanks in advance.

Pomona swap meet this Sunday, 8-13-2017!!!

The Rocknrod 08-10-2017 01:11 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
Remove the wires one at a time and transfer them to a new switch. If your trying to change the Key'd section of the switch without a key - good luck.

scoot_mcgrute 08-10-2017 01:35 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
I ended up buying a whole new ignition switch when I swapped keys, I think it was around $15 for the new switch.

My truck didn't have the right key with it when I bought it and I tried a few different options of getting the lock cylinder out but nothing worked for me. New switch and new lock cylinder and away I went :)

CousinTone 08-10-2017 01:42 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
So, drill it out, gingerly, and go from there installing new switch and mount in place?

paulspickupparts 08-10-2017 01:49 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
As you know without the key you cannot remove the cylinder. Sometimes you get lucky and the door handle lock will still match the ignition key. You can take your door handle to a locksmith and have if make a key , hoping they still match. You might ask lockdoc on this forum . He probably has the best answer.

Over the years I have accumulated few hundred original keys from salvage trucks. Usually I can find one that works but takes a lot of time. Good luck.

CousinTone 08-10-2017 02:08 PM

Any locksmiths in the Orange County area in CA.



Quote:

Originally Posted by paulspickupparts (Post 8013712)
As you know without the key you cannot remove the cylinder. Sometimes you get lucky and the door handle lock will still match the ignition key. You can take your door handle to a locksmith and have if make a key , hoping they still match. You might ask lockdoc on this forum . He probably has the best answer.

Over the years I have accumulated few hundred original keys from salvage trucks. Usually I can find one that works but takes a lot of time. Good luck.

Posted via Mobile Device

paulspickupparts 08-10-2017 02:16 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
I just did a google search and found over 15 in your area.

CousinTone 08-10-2017 02:47 PM

Re: 64 C20 ignition swap withOUT key, is it possible?
 
I appreciate you googling I was hoping to do business with someone from the boards. It's always my first choice. If no one responds, I'll use a stranger. Thanks. TV




Quote:

Originally Posted by paulspickupparts (Post 8013725)
I just did a google search and found over 15 in your area.



All times are GMT -4. The time now is 10:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com