What finish did you use on the bottom side of you floor pan ?
 

Looking for ideas on what others have used for finish on bottom of floor pan on blazer during restoration. Any ideas or pics greatly appreciated

Re: What finish did you use on the bottom side of you floor pan ?
 

Raptor liner on top of por15

Re: What finish did you use on the bottom side of you floor pan ?
 

Mine got a good undercoating ,dont remember what kind .

Re: What finish did you use on the bottom side of you floor pan ?
 

Epoxy over bare metal then painted with satin black urethane single stage.

Re: What finish did you use on the bottom side of you floor pan ?
 

Raptor liner on top of Por15. Worked out great for me and looks good.

Re: What finish did you use on the bottom side of you floor pan ?
 

Say 69 72,curios as to bottom of box panels I see two drain holes.Were those oem and you drilled an xtra hole?

Re: What finish did you use on the bottom side of you floor pan ?
 

That's the way they come. I have another blazer that has the holes as well

Re: What finish did you use on the bottom side of you floor pan ?
 

Thanks for your reply.Just realized what I did to bottom of mine.Wont hurt none though.Gettin ready to seal mine up to.Not sure on product yet myself.Not meaning to steal your thread Mike.

Re: What finish did you use on the bottom side of you floor pan ?
 

U-POL on the bottom of the floor, POR-15 on the rocker boxes, frame and bottom of fender wells.

Re: What finish did you use on the bottom side of you floor pan ?
 

I used lizard skin ceramic undercoating. I'm not putting carpet back in so I needed something to keep it cooler. They say 20+ degrees difference. I did firewall also. Really happy with how it looks.

Re: What finish did you use on the bottom side of you floor pan ?
 

epoxy primer, 3M Body Schutz

Re: What finish did you use on the bottom side of you floor pan ?
 

epoxy sealant, then Cool Car Ceramic

Re: What finish did you use on the bottom side of you floor pan ?
 

I used OEM rocker guard over the epoxy primer. Then painted it in single stage paint in body colour. Pictures in my build thread although the texture appears a lot stronger in the picture from the lighting than it actually has.

As far as I know from the factory the General painted them factory body colour and then sprayed a black anti-chip type material is key areas.

Re: What finish did you use on the bottom side of you floor pan ?
 

Line-X

Re: What finish did you use on the bottom side of you floor pan ?
 

Re: What finish did you use on the bottom side of you floor pan ?
 

Epoxy primer top aND bottom then lizard skin sound Deadener and thermal inside and box liner on the bottom that damn rust can go to hell and stay away.

Re: What finish did you use on the bottom side of you floor pan ?
 

I had mine media blasted then I sprayed epoxy primer on then went in behind that and shoot it with Rocket bedliner kit.....
Should be around when my grandkids , grandkids are here!!