The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   Best Option to Hook Up aftermarket Horn? (https://67-72chevytrucks.com/vboard/showthread.php?t=788545)

Starwood 06-13-2019 03:40 PM

Best Option to Hook Up aftermarket Horn?
 
2 Attachment(s)
Hey fellas -

Stupid questions v3.0:

The male connector for the 15A fuse on the box is loose as you can see in the pic below. Is it OK the use this loose pin as a power source for an aftermarket horn that is using a toggle switch relay - or avoid it all together?

I ask because when I did try this route, it worked fine for a while, then radio went out, then horn...basically my system DID NOT like it.

Simply put, what would be the best pin option to attached this hot wire to?
Here is a pic of the toggle relay under the dash.

Thanks in advance.


All times are GMT -4. The time now is 10:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com