Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

I had another fuze in the truck, plugged it in and it blew...:waah:

Any ideas to get me back on the road?

Thanks!

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

Sounds as if you have a straight to ground issue.

Which fuse is it?:chevy:

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

ECM 1 fuze

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

Wonder if I pull the 30 amp accessory fuze I might get lucky and it will start? Only have one fuze left :dohh:

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

Found it after much searching, a frayed wire at the injector area.

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

You nailed it :ito:

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

what size was the original? 10a....

if it was 30, I'd say why not... never put a larger amp fuse in place of one that's instantly blowing, your asking for a much bigger problem than you had such as a fire. even if its just to get you home...
clint

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

Glad you found it. Sorry haven't been on the computer in a couple of days. Had no internet.:chevy:

Re: Stranded in middle nowhere, 1987/350 manual ECM fuze blown
 

ECM 1 is a 10 amp, I was only going to pull the 30amp to see it affected the short, not use it in place of a 10 amp. ;)