Balljoint problem
Trying to get lower balljoint off but the nut on the stud turns with it.Anyone have any ideas Ive tried everything I can think of.
------------------ 71 C-10 custom Deluxe |
clamp a set of "moon" vise grips around the ball joint?
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET |
What are "moon" vice grips? Do they have cupped jaws. Does sears have them.
|
yea the jaws are cupped..... sears should probaly have them
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET |
Thanks 68 should have better luck tommorrow,BTW is it possible to press in the new balljoints myself.
|
harbor freight has a ball joint install tool thats fairly cheap and a LIFE SAVER i hear.... but me i have a neighbor thats a machinst that has a 7 thousand buck press..... guess not everyones that lucky lol
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET |
Vice grips worked I've got all the arms off and cleaned now for new balljoints and reassembly and test drive can't wait. Thanks for the tip. This board rules.
------------------ 71 C-10 custom Deluxe |
Jack up the truck so the weight is on the balljoint and then try to take the nut off.That usually works for me.
|
glad to see it worked!
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET |
you did it with vice grips ?! hope you mean just got the nut off with the vice grips assisting you!@
|
Fast 68...Yeah I used the vice grips to hold the stud under the knuckle, let the grips wedge against the arm and used a wrench and hammer to shock it off......vice grips to take nut off,I'm not that stupid, well not today anyway.
Thanks everyone for all the help. I appreciate it. ------------------ 71 C-10 custom Deluxe |
All times are GMT -4. The time now is 11:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com