The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   60-66 Suburbans (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=241)
-   -   Need special bolt for jump seat for 66 burb (http://67-72chevytrucks.com/vboard/showthread.php?t=735388)

1966burb 04-13-2017 10:58 AM

Need special bolt for jump seat for 66 burb
 
3 Attachment(s)
I know this is a long shot, but throwing it out. I need one special bolt for the pivot or hinge point on my passenger folding jump seat on my 66 burb. The part that is special is the shoulder under the head of the bolt. I have searched shouldered bolts and have found nothing close. I may have just make a sleeve that slides on the bolt but OD dimension is odd so it will need to be turned down on a lathe. Hoping someone has a rusted out or broken frame in their special junk that has the bolt I need.

Southcity 04-13-2017 03:08 PM

Re: Need special bolt for jump seat for 66 burb
 
Curious to know if the bolt in your pic is stripped and unusable? if not and it's just a bit rusty it would be easy to restore it to like new condition. Or is it that you only have one and need more than that?

1966burb 04-13-2017 08:52 PM

Re: Need special bolt for jump seat for 66 burb
 
This is the good one. Other one is broken. J

Southcity 04-13-2017 09:11 PM

Re: Need special bolt for jump seat for 66 burb
 
Thought that might be the case, good photos and drawing btw. Agreed that to match exactly would mean either someones rare spare parts bin or salvage yard. The alternative would be to find something that looks the part and functions as the stock piece with little to no modifications. I'm sure others will chime in too, here is a link to PIC which has both stock sized and custom made precision shoulder screws:

http://www.pic-design.com/precision-...er-screws.html

1966burb 07-12-2017 09:29 AM

Re: Need special bolt for jump seat for 66 burb
 
Still looking for one bolt. I may just have to find something close and have it machined to match.

pimpston65 07-12-2017 01:55 PM

Re: Need special bolt for jump seat for 66 burb
 
Quote:

Originally Posted by 1966burb (Post 7989081)
Still looking for one bolt. I may just have to find something close and have it machined to match.

i know of a spot where such a bolt is to be had!!! is it the bolt that attaches to the front two curved legs for the jump seat? if so i can hit this place up this week end...

Captainfab 07-13-2017 12:06 AM

Re: Need special bolt for jump seat for 66 burb
 
I would just get a couple 5/16" x 1/2" button or pan head bolts, have a couple sleeves machined to ~.314" ID x .440 OD and .125 long and slide the over the bolts. That is not ideal but should last for quite a while.

1966burb 07-13-2017 01:11 AM

Re: Need special bolt for jump seat for 66 burb
 
Yes, thanks, I have already got the bolts and was headed that direction with making some sleeves. j

1966burb 07-14-2017 09:48 AM

Re: Need special bolt for jump seat for 66 burb
 
2 Attachment(s)
Here are some pics of the bolts in seats.

pimpston65 07-14-2017 10:29 AM

Re: Need special bolt for jump seat for 66 burb
 
2 Attachment(s)
Quote:

Originally Posted by 1966burb (Post 7990636)
Here are some pics of the bolts in seats.

these are the seats from the bone yard i hit

1966burb 07-17-2017 09:28 AM

Re: Need special bolt for jump seat for 66 burb
 
One bolt looks correct for sure. You would want to soak those with PB Blaster or sometime to keep from breaking them off during removal. J

pimpston65 07-17-2017 03:10 PM

Re: Need special bolt for jump seat for 66 burb
 
Quote:

Originally Posted by 1966burb (Post 7992782)
One bolt looks correct for sure. You would want to soak those with PB Blaster or sometime to keep from breaking them off during removal. J

i got a bag oh tricks for bone pickin, i even take a propane torch. if you want it you gotta tell me cuz its an hr away a i go as needed.

1966burb 07-17-2017 11:30 PM

Re: Need special bolt for jump seat for 66 burb
 
One bolt is holding me up. I could really use one. Don't make a special trip. I have a regular bolt holding it in place for now. J

wahl4m 09-01-2017 11:00 AM

Re: Need special bolt for jump seat for 66 burb
 
i use a self locking nut on the inside of the seat frame ! that way the bolt i wont be tightened up too far- & it lets the pivot point swivel & somebody getting in the back -wont scrape there leg or body on the nut edges ??

1966burb 09-19-2017 10:56 PM

Re: Need special bolt for jump seat for 66 burb
 
Machined a sleeve to fit on a bolt and got the seat bolted back in. Would still like to find an original bolt. Jim

1966burb 04-11-2018 02:51 PM

Re: Need special bolt for jump seat for 66 burb
 
Still would like to find one original bolt for my seat. J

pimpston65 04-17-2018 11:40 PM

Re: Need special bolt for jump seat for 66 burb
 
Quote:

Originally Posted by 1966burb (Post 8235907)
Still would like to find one original bolt for my seat. J

all you need to do is say " hey pimp could u get that bolt for me" im a sucker for bone yard picks, plus i know where one is just waiting on u!!!

1966burb 04-19-2018 07:44 PM

Re: Need special bolt for jump seat for 66 burb
 
Good afternoon- That would be great if you can get me the special bolt next time you hit the wrecking yard. Thanks Jim

pimpston65 04-20-2018 12:46 AM

Re: Need special bolt for jump seat for 66 burb
 
Quote:

Originally Posted by 1966burb (Post 8242731)
Good afternoon- That would be great if you can get me the special bolt next time you hit the wrecking yard. Thanks Jim

i'll be going this saturday...

1966burb 04-20-2018 12:06 PM

Re: Need special bolt for jump seat for 66 burb
 
Thanks Jim


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com