The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   Which yoke (https://67-72chevytrucks.com/vboard/showthread.php?t=780358)

pimpston65 01-28-2019 04:17 AM

Which yoke
 
1 Attachment(s)
Hello, I have a sm420 and I need to know which rear yoke to use to mate to my divorced np205 thanks for any and all help...

b454rat 01-28-2019 07:10 AM

Re: Which yoke
 
Use whatever series the current yoke is. Remember to use a slip at the t-case side.

pimpston65 01-28-2019 11:11 AM

Re: Which yoke
 
i should have explaned my issue better. the yoke in the picture is what im looking to identify because the trans i have doesnt have one.

b454rat 01-28-2019 12:00 PM

Re: Which yoke
 
Not sure on SM-420s.....

pimpston65 01-28-2019 12:30 PM

Re: Which yoke
 
Quote:

Originally Posted by b454rat (Post 8452995)
Not sure on SM-420s.....

thanks for the reply

jeffahart 01-28-2019 02:55 PM

Re: Which yoke
 
Rear trans output is usually 1350 and transfer output 1310. But you should measure it. Measure the yoke for joint end cap to end cap length and measure for cap diameter. I don't know them off my head, you can Google for U-Joint sizes and find what you have based on your measurements. :chevy:


j

pimpston65 01-28-2019 03:33 PM

Re: Which yoke
 
Quote:

Originally Posted by jeffahart (Post 8453112)
Rear trans output is usually 1350 and transfer output 1310. But you should measure it. Measure the yoke for joint end cap to end cap length and measure for cap diameter. I don't know them off my head, you can Google for U-Joint sizes and find what you have based on your measurements. :chevy:


j

thanks. i had the same sm420 and divorced np205 in the truck but sold the sm420 awhile back. so everything is the same, except i have another sm 420 with a brake that im switiching back to the same setup. all i need is the coverplate which i have and the fixed yoke is the last piece i need for the trans...


All times are GMT -4. The time now is 08:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com