70-71 Valve Cover Decal
 

Reproduction 8:350 valve cover decal found on some 1970 and 71 trucks. I had these reproduced for my own restoration building off the work of member Steve Hafner.

EDIT 3/27/23: I recently had the chance to get up close and personal with an original (almost completely) intact version of this decal. Since I've got a new build going, I took the opportunity to photograph it and revisit our reproduction. Our first attempt was based off old GM media and off angle pics of barely there survivors. This "Mark II" version is a much more faithful reproduction with regard to font and dimension. It looks like I can't delete the pics below without contacting an administrator. Just know that the pics below are of our first attempts and not the new better version.


Revised (Improved) Version $15 shipped

Thanks,

Brad

Re: 70-71 Valve Cover Decal
 

These look really nice. Were these made to withstand the engine compartment environment? As I understand it, these only go on the passenger side (I've seen other threads about this). Also, are the originals a sticker or a silk screened thin piece of metal with an adhesive backing. Akin to a an emblem.

Re: 70-71 Valve Cover Decal
 

Thanks. They do only go on the passenger side. They are discussed in a few threads here on the site. I am not sure about the construction of the originals, and have never seen one in person myself. My opinion is that they were "stickers" on par with the other decals in the engine compartment at that time. With regard to the heat resistance of these decals, I cannot say with certainty. I had a long conversation about this with the printer during the planning stages and the most heat tolerant stock that matched our design requirements was chosen. I have 180 miles on my Blazer (all in summer in Georgia) since completion and it shows no signs of degradation or release at this point.

Re: 70-71 Valve Cover Decal
 

I'll take one of the "final" versions. PayPal ok, or do you prefer another method? Thanks- Ryan

Re: 70-71 Valve Cover Decal
 

PM sent.

Re: 70-71 Valve Cover Decal
 

Payment sent, thanks again!

Re: 70-71 Valve Cover Decal
 

I will take one, 'final' version.

Re: 70-71 Valve Cover Decal
 

PM sent.

Re: 70-71 Valve Cover Decal
 

I'll take one, final version.
Thanks

Re: 70-71 Valve Cover Decal
 

Ill take 2 final and one beta. could you adjust shipping? Thanks

Re: 70-71 Valve Cover Decal
 

PMs sent.

Re: 70-71 Valve Cover Decal
 

if you still have them I will take 2 of the final version.
pm with paypal info
thanks phililp

Re: 70-71 Valve Cover Decal
 

PM sent.

Re: 70-71 Valve Cover Decal
 

payment send for a pair of the final versions
thanks
philip

Re: 70-71 Valve Cover Decal
 

Thanks. I'll put them in the mail tomorrow.

Re: 70-71 Valve Cover Decal
 

Decal arrived this morning. Absolutely beautiful!

Re: 70-71 Valve Cover Decal
 

Awesome!

Re: 70-71 Valve Cover Decal
 

3xt.

Re: 70-71 Valve Cover Decal
 

. . . .

Here's the one on my C-10 . . . about two hundred miles on it too and still there !!!

. . . .

Re: 70-71 Valve Cover Decal
 

It looks great Steve...like it was made for it;) Thanks for the pic.

Re: 70-71 Valve Cover Decal
 

Do u have any more final version

Re: 70-71 Valve Cover Decal
 

I'll take a final version if still available.

Re: 70-71 Valve Cover Decal
 

Yes I do.

PM sent.

Re: 70-71 Valve Cover Decal
 

PM sent.

Re: 70-71 Valve Cover Decal
 

Thanks for doing these, I would like to purchase 2 final versions.