WTB original 4-speed yoke
 

We have a 1/2 ton enclosed driveshaft rearend and the 4-speed granny we have came out of a 1-ton truck. Needed is the a 1/2 ton yoke to couple to the drive shaft. See the pictures below of the parts we need. Thanks if you can help out.

Re: WTB original 4-speed yoke
 

The trans is a sm420 enclosed driveline or torque tube, 1947-53 for a half ton truck. The yoke is for a 10 spline output shaft. It's all I need to have a running truck.

Really hoping someone who changed to a V-8 / Auto in their truck would have one of these laying around. Or perhaps a lead to find one... Offer $100 if you have it.

Thanks, Clemdaddy

Re: WTB original 4-speed yoke
 

I have a couple of trans laying in the shop. You need the trans end? If I have one it's free.

Re: WTB original 4-speed yoke
 

Would anyone know of a used parts dealer with lots of old chevy parts and possibly have a phone number. Any help would be greatly appreciated.

Re: WTB original 4-speed yoke
 

I have the yoke. I do not think I have the bolts and clamps. Had them but mis placed. My cell is 4O2 643 5369. Thanks

Re: WTB original 4-speed yoke
 

Clem , I think I was able to get everything you need . Ended up that it came from about 4 different trucks but should have everything. I gave you a call and left a message. Could ship on Monday. Thanks Paul

Re: WTB original 4-speed yoke
 

Thanks Paul, Bigtime

I will call you tomorrow and work the details out.

Re: WTB original 4-speed yoke
 

Sent money day before yesterday... parts were exactly what I needed.
Thanks a bunch and have a Merry Christmas.

Re: WTB original 4-speed yoke
 

Thanks again Clem . Appreciate your business . Have a very Merry Christmas .

Re: WTB original 4-speed yoke
 

I actually am looking for the exact same piece for my 1953 1/2 ton. Anyone have the yoke/bolts/and speedo gear?

Patrick (662) FOUR ONE EIGHT - EIGHT 3 3 FOUR