The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   CA Parting out 84 Chevy 3/4 ton 4x4* (https://67-72chevytrucks.com/vboard/showthread.php?t=376347)

KrazyRay 12-14-2009 02:32 AM

Parting out 84 Chevy 3/4 ton 4x4*
 
5 Attachment(s)
I have this truck that has back DMV fees of $1700 owed.:waah: I don't think it will ever see the road again. The interior has been stripped, but most pieces are in the bed. Notice the wood steering wheel.
tilt column with bad steering wheel threads $40 plus shipping
14 bolt rear and GM front axle $300 pair local only
radiator $50 plus shipping
350 engine low miles runs great $400 local only SOLD
208 t-case formerly mated to 700r4 $50 local only
wing windows $20 each plus shipping
The bed and back end of the frame are gone. This is a nice rust free cab for patch panels. Ask and I will quote prices. Thanks, Ray

68Timber 12-14-2009 01:35 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Looks like a nice set of Warn premium hubs for somebody.

KrazyRay 12-14-2009 06:23 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
5 Attachment(s)
Quote:

Originally Posted by BRUISER (Post 3674324)
Looks like a nice set of Warn premium hubs for somebody.

Yes, they are the full turn hubs and are included with the axles.
uncut gauge bezel $20 plus shipping SOLD
misc trim pieces $5 each plus shipping A pillars, headliner SOLD
maroon arm rests $5 each plus shipping

KrazyRay 12-14-2009 06:49 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
3 Attachment(s)
700r4 flywheel cover $25 plus shipping
factory tow hooks $30pr. plus shipping SOLD
misc emblems $5 each plus shipping

62 short step 12-14-2009 08:42 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
I sure would like the rolling chassis, but to far away. :waah:

Stitch 12-14-2009 10:58 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
how much for the a pillars and the fender emblems shipped to 29151...and also, how does a plastic emblem rust or is that just junk on them...thanks

Chuck

Scootin 81 C20 12-14-2009 11:10 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Hey Ray, what are the gauges under the dash? How much for the setup? Does this truck have a non-clock clear plastic that went over the gauges?

Thanks
Benjamin.

Stitch 12-14-2009 11:35 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
in the third picture down, you can see the clock in the cluster...

Scootin 81 C20 12-14-2009 11:47 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Thanks, didn't notice it. Still interested in the gauges under the dash. One more question, any idea if they work?

WestButteTruck 12-15-2009 12:24 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Does it have a cargo light?

KrazyRay 12-15-2009 12:58 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by Fat Hoe (Post 3675313)
how much for the a pillars and the fender emblems shipped to 29151...and also, how does a plastic emblem rust or is that just junk on them...thanks

Chuck

I have the 2 A pillars and only 1 fender emblem $15 I'll get back with you on the shipping. Junk debris on emblem...it sat under a tree.

KrazyRay 12-15-2009 01:01 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by Scootin 81 C20 (Post 3675409)
Thanks, didn't notice it. Still interested in the gauges under the dash. One more question, any idea if they work?

The gauges under the dash are $20 shipped. I think they work but can't guarantee. Thanks, Ray

Stitch 12-15-2009 08:27 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by KrazyRay (Post 3675560)
I have the 2 A pillars and only 1 fender emblem $15 I'll get back with you on the shipping. Junk debris on emblem...it sat under a tree.

that'll work ...thanks

Scootin 81 C20 12-15-2009 05:21 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
That sounds good. Any idea what the gauges are first?

jchav62 12-15-2009 05:37 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
What can you tell me about the carb. Looks to be and Edelbrock "Q-Jet". Is it in good running condition? Willing to sell seperately? If so, how much shipped to 87507?

Thanks! JC

KrazyRay 12-15-2009 08:40 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by WestButteTruck (Post 3675486)
Does it have a cargo light?

Yes, the cargo light is $30 shipped. Thanks, Ray

KrazyRay 12-15-2009 08:48 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by jchav62 (Post 3676415)
What can you tell me about the carb. Looks to be and Edelbrock "Q-Jet". Is it in good running condition? Willing to sell seperately? If so, how much shipped to 87507?

Thanks! JC

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray CARB SOLD

Sarge261 12-15-2009 09:05 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
How much for all the headliner trim shipped to 12303, also do you have the glovebox door hinge? if so how much for that too.

BTW nice steering wheel LOL

Sarge

KrazyRay 12-15-2009 09:28 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
3 Attachment(s)
Quote:

Originally Posted by Sarge261 (Post 3676771)
How much for all the headliner trim shipped to 12303, also do you have the glovebox door hinge? if so how much for that too.

BTW nice steering wheel LOL

Sarge

I can do $35 shipped on the headliner trim (4 pieces). I'll check on the hinge. Thanks, Ray

KrazyRay 12-15-2009 11:35 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
5 Attachment(s)
Pics for 87Bob

Scootin 81 C20 12-15-2009 11:41 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Ray, how much for the dash speaker brackets and all the hardware for them?

Stitch 12-15-2009 11:58 PM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Can you put both of these seatbelt covers in my box too and I need a price...thanks

http://www.67-72chevytrucks.com/vboa...1&d=1260926888

http://www.67-72chevytrucks.com/vboa...1&d=1260934540

KrazyRay 12-16-2009 12:50 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by Scootin 81 C20 (Post 3676391)
That sounds good. Any idea what the gauges are first?

The gauges are temp, volts, and oil pressure. The brand name is sunpro. I'll get back to you on the speaker brackets. Thanks, Ray

2badgn 12-16-2009 07:37 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
How much for the interior dome light with all the harnessing to the fuse box?

Thanks
Frank
Is the cargo light still available? Does the price include the harness and switch?
Maz18@verizon.net

KrazyRay 12-16-2009 10:48 AM

Re: Parting out 84 Chevy 3/4 ton 4x4
 
Quote:

Originally Posted by 2badgn (Post 3677546)
How much for the interior dome light with all the harnessing to the fuse box?

Thanks
Frank
Is the cargo light still available? Does the price include the harness and switch?
Maz18@verizon.net

Yes, the price includes harness and switch. WestButteTruck is first in line. I will check another truck for dome light with harness. If I have one it will be $20 shipped. Thanks, Ray


All times are GMT -4. The time now is 04:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com