parting 70 blazer 6cyl 3ott
 

Do not ask about the sliders here they are in a separate post.

heres a good rusty crusty being parted. 70 4wd 250 and 3 speed with dana transfer case and that u pattern shifter. ask about smalls but this thing is pretty roachy.

all big stuff is local pickup since shipping is killer but if you cant live without it let me know and we may be able to arrange shipping.


seats front and back they are all going to need new brackets or repair to them as the carpet held moisture but the seat frames and springs themselves are rust free. can take better pics once rain stops in a few days 450 local pickup

door latch reinforcement plates 70 shipped

hatch no glass and has a crack on the bottom but can be repaired 150 local pick up

spare tire carrier what you see is what I have for it. 250 local pickup

Re: parting 70 blazer 6cyl 3ott
 

I’d like to have the top inner bracket for the tire swing ...

Re: parting 70 blazer 6cyl 3ott
 

Going to try and keep it together right now. Will let you know if I piece it out.

Re: parting 70 blazer 6cyl 3ott
 

Rear bumper brackets - splash shields - license plate holder ?

Re: parting 70 blazer 6cyl 3ott
 

Hatch access panel cover, rear seat arm rests.

Re: parting 70 blazer 6cyl 3ott
 

Is the tire rack a factory one? Would You be willing to take it to the UPS store as they will box and ship it. Thank You, Steve

Re: parting 70 blazer 6cyl 3ott
 

Is the center speaker there? Plastic door screws next to vent window?

Re: parting 70 blazer 6cyl 3ott
 

will check for them tommorow

no access cover and not splitting armrests from seat

the tire carrier is not factory it is aftermarket. and I can pack and ship but it will be a lot to az.

will check for speaker I don't think its there and yes I think the plastic ferruls are there I don't think the screws were correct.

Re: parting 70 blazer 6cyl 3ott
 

How much to 86426, Fort Mohave, Arizona?

Re: parting 70 blazer 6cyl 3ott
 

could be as much as 200 but would have to remove box and get an actual quote but would guess 150 minimum ups.

Re: parting 70 blazer 6cyl 3ott
 

I would be interested in rear seat brackets.
also the rear bumper brackets too.

Re: parting 70 blazer 6cyl 3ott
 

bumper brackets you are second in line for rear seat brackets are no good due to moisture in the carpet.

Re: parting 70 blazer 6cyl 3ott
 

How about the rear hatch?

Re: parting 70 blazer 6cyl 3ott
 

has a break through on the bottom I will check it over better and get better pics of it tomorrow.

Re: parting 70 blazer 6cyl 3ott
 

Rear seat arm rests pending condition ?

Re: parting 70 blazer 6cyl 3ott
 

Slider hatch windows !

Re: parting 70 blazer 6cyl 3ott
 

not splitting from seat.

Re: parting 70 blazer 6cyl 3ott
 

I will take the visors and screws pending price and condition.

Re: parting 70 blazer 6cyl 3ott
 

How are the 4wd lockouts? Rear bumper step, the white bar over the license plate thing? If it's an np205 I'd be interested in the 4wd shift lever and bolt. All shipped to Livingston, MT 59047

Thanks

Joe

Re: parting 70 blazer 6cyl 3ott
 

don't think they are fantastic but should be usable ill check tomorrow.

joe lockouts work and are usable wont call them mine dials are a little faded and rings have some dings but turned nice and smooth. the rear bumper step ill take a better pic of it tomorrow. 100 for hubs and 25 for step if you take the hubs plus shipping. transfer case is not a 205

Re: parting 70 blazer 6cyl 3ott
 

Ok, I'll pass on the hubs, interested in the step pending closer pictures. Dang too bad on the t case.

Thanks

Joe

Re: parting 70 blazer 6cyl 3ott
 

OK, I will have to find one closer to home. Thank You

Re: parting 70 blazer 6cyl 3ott
 

Does it have leveling mats?

Re: parting 70 blazer 6cyl 3ott
 

How is the sandalwood dash pad - I'll take it if in decent shape pending pix and price shipped.

Re: parting 70 blazer 6cyl 3ott
 

What kind of shape are the seatbelts in I would be Intrested in the complete set